Features:
1. Connecting You Doorbell Ring: This Power Supply Adapter for the Ring can connect you Ring Video Doorbell to the power adapter directly,forget the hassle of charging your battery and let your Ring continuous operation.
2.Easy Installation: Assemble through door hole and simply connect the wire to your Ring,install and setup can be completed in a few minutes,no need for an existing doorbell or new wiring,can be installed on any door.
3. Necessary for your Doorbell: It's the most simple and convenient way to operate your Video Doorbell,with the Power Adapter,you can let your Video Doorbell continuously running and no need to remove your doorbell for charging the battery.
4. Universal Compatibility: With an AC output of 18V/500mA and super long 25ft cable,no worries about the power adapter isn't long enough to connect the outlet to the doorbell.
24V Doorbell Transformer plugs into your standard 110 v/120 v outlet and converts to 24 volt 500 ma AC current.for Ring Doorbell power supply easy to install: assembled along the wall from your socket to the doorbell and thermostat, easy to install.
Compatibility:24V doorbell transformer to power your video doorbell.Compatible with Ring (pro 1/2 & 2020 release, 3/4/plus), Nest, Eufy, Skybell, Arlo, Video Doorbell etc. Continuously converts 110/120v to 24V 500ma.
Specification:
Input: AC120V;60Hz
Output: AC 24V;500mA (for 24v)
Length: 26ft (8m)
Wire Type: Stranded copper wire
Package Includes:
1 X Power Adapter (Doorbell not in the package)
Note: Every Video Doorbell may take a few minutes to power on after wiring the power adapter,especially for the first time use, Please try to charge your video doorbell longer before use.
NOTE:Please confirm the required voltage and current of your video doorbell before purchasing, you can check it on the back of the doorbell.Please connect the doorbell before connecting the power supply, and be careful not to let the two cables connected together cause short circuit.
For Doorbells
Keep adapter unplugged.
Install wires from 24 volt adapter into the terminals for your doorbell unit (Simply attach the two rings to the doorbell and tighten the screws, regardless of positive or negative polarity)
Plug adapter into outlet.
Power up and verify your doorbell is receiving necessary power using the accompanying application.
For thermostats
Cut off the power of circuit breaker.
Cut off the two loops at the end of the power cord to expose the core.
Install the wire from your 24 volt adapter to the “C” terminal and the other wire to the “RC” terminal. You need to use included jumper and connect from “RH” to “RC” terminals,if HVAC system has a cooling.
Plug the power adapter into the socket and turn on the power of the circuit breaker. Install the panel on the thermostat.
Note: Before purchasing, Please confirm that the voltage and current required by the doorbell are consistent with this power supply. Please consult the Voltage requirements of your doorbell for specific recommendations.