Feature:
l Brand new and high quality
l The motor built-in drive double output shaft, shaft diameter 8mm with M8 thread at both ends, one positive and one reverse
l The motor bearing is from Japan's NMB, the rated speed of the motor is 2100r/min, and the no-load speed is 2500r/min. It can be used for retrofitting air purifiers, DC fans, ventilation fans, etc.
l The motor needs two sets of power supplies, one set of DC24V is the motor drive power supply, and the other set of DC5V is the power supply of the motor control part
l Note: The brushless motor needs a stable power supply, and the positive and negative poles of the power supply are strictly forbidden to be reversed, otherwise the drive circuit will be burned out!
l Definition of motor wiring: red wire is connected to the positive pole of the power supply (DC24V), black wire is connected to the negative pole of the power supply (24V and 5V negative pole), the white wire is connected to the positive pole of the power supply 5V, the yellow wire is connected to the external pulse speed control signal (the duty cycle is fixed at 50%, the frequency is 50Hz~500Hz Internal speed regulation, the PWM amplitude is up to 5V, the blue line is the speed signal output (not need to connected if it is not used), the green line is start and stop (start the motor in parallel with GND)
Specification:
l Types: Motor, Speed Governor (Optional)
l Rated Voltage: DC24V (20V~26V)
l Maximum Current: 2.5A
l Rated Speed: 2100r/min
l Maximum Power: 60W
l Rotation Direction: Counterclockwise
l Applicable Model: for Xiaomi Purifier 2/2S
Package: (Optional)
l 1x Motor
Or
l 1x Speed Governor