Switch PoE 4x 100Mb/s PoE/PoE+ 2x RJ45 Uplink 100Mb/s Gigabit Network Desktop

PoE Extralink EUROS v2 switch

It is a 6 port unmanaged switch with 4 PoE ports - with a maximum speed of 100 Mbps and IEEE 802.3af/at support - with maximum power per port up to 30W. The switch also has 2 RJ45 ports without PoE power options. These ports can be used as Uplink ports or to connect additional devices e.g. video recorder in monitoring applications.

Four additional operating modes of the PoE switch

There are four switches on the front of the EUROS v2 Switch, which allow you to run additional modes to improve network performance or range. Below are the operating principles of each mode:

Power over Ethernet

The EUROS v2 switch supports IEEE 802.3 af/at standards, automatically detects and identifies PoE devices that comply with these standards and provides power to them. There is no need to worry about devices that do not need power through PoE (not supporting IEEE 802.3 af/at standards) because the switch will not power these devices. The maximum power supply connected to the switch is 60W.

  • VLAN mode - when this mode is activated, ports 1-4 are isolated from each other, effectively suppressing broadcast storms and improving network performance.
  • EXTEND mode - allows ports 1-4 to effectively transmit data and PoE power over distances of up to 250 metres. This is ideal for video surveillance systems.
  • AI PS mode - the switch automatically detects the operating status of a connected device to one of the PoE ports. When it determines that it is operating incorrectly - it automatically restarts the device.
  • AI QoS mode - in this operating mode, video data is prioritised to ensure smooth video. A solution used primarily in monitoring solutions.