Autel MaxiCOM Ultra Lite--- New Autel Intelligent Diagnostics! (2-Year Free Software Updates, Valued $2590)
Autel MaxiCOM Ultra Lite to entitle more alternative to large-scaled car repair workshops. Same software features as Autel MaxiSys MS909, major improvement is made in hardware (same as Autel MaxiSys Ultra) to give a full scope diagnostic scan tools of various demands.

High-lights of the AI Autel MaxiCOM Ultra Lite Scanner:

One of the Top Hardware:

12.9-inch 2732 x 2048 Touchscreen, 2.3GHz + 1.7GHz OCTA-CORE processor, 256GB SSD / 4GB RAM, 18,000 mAh battery, 16MP Rear/ 5MP Front cameras, Charging Docking

Essential Software Features:

Intelligent Diagnostics: give full and detailed DTC explanation and effective repair solution with TSB (OEM Information), DTC Analysis, Repair Assist, Repair Tips, and Relevant Repair Cases.

J2534 ECU Programming & Coding: ECU Programming & Coding on BMW and BENZ after replaced new ECU modules; Coding the adaptive data to on-board systems, improve vehicle performance.

Topology Mapping: displays a system distribution diagram of the vehicle control modules and colored differently based on the diagnostic scan results.

10000+ Vehicle Compatibility: compatible with the most extensive coverage for 80+ American, Asian and European makes, 140+ brands and 10000+ models, support more newer vehicle models with CAN FD/ DoIP protocol for high-speed vehicle diagnostic communication.

OE Level All System Diagnostics:run deep analysis on all the available systems and list DTC reasons by priority.

38+ Service Functions: perform over 38+ kind of most needed service and reset functions on widest vehicle coverage.

More High-End Features:Active Tests, VAG Guided Functions, Key Programming, Power Balance, Component Matching, Online Account Login Service and etc.

Auto VIN/ Auto Scan/ Scan VIN/ Scan Plate:4 methods help mechanics to identify vehicle information rapidly.

13 Languages Options, No IP restriction: could be used any country or region on the global, 13 types of language options, friendly to more language native speakers.

More Hot New Features:compatible with Autel MP408 oscilloscope, MV108 end-scope, BT506 battery tester; and support print via WIFI, Data Management in Autel Cloud, Remote Expert and etc.

Autel MaxiCOM Ultra Lite Intelligent Diagnostic Scan Tool-- Functions Same as Autel MS909/ MS919/ Ultra

Autel MaxiCOM Ultra Lite car scan tool adopts the scientific data cloud computing technology to match the specific fault code with the exact vehicle model. And the data has been thoroughly verified by automotive maintenance professionals. The following are main parts of the code data contained in Intelligent Diagnostics are:

Vehicle System and Detected DTC(s) : displays the name of the vehicle system(s) and the detected DTC(s)
Technical Service Bulletin (OEM Information): contains DTC-related recalls, TSB, and OEM campaigns.
DTC Analysis: provides repair assistance information related to the fault code.
Repair Assist: intelligently prioritizes DTCs and leads the user to the proper repair.
Relevant Cases: offers relevant fault-clearing cases for reference.
Module Topology Mapping

Display the entire system through the Topology Map to glance all the modules with faults, which is easy to locate faults and causes.
Color-coded topology displays all system status in one page and the number of DTCs.
Zoom in and out to get to the control module quickly.
NOTE: Intelligent Diagnostics & Topology is not universal to all the vehicles, please check VIN with us for compatibility before you order!

Autel MaxiCOM Ultra Lite Scanner--- BMW & BENZ ECU Programming, ECU Coding Same Autel MaxiSys MS919/ MS909

ECU Programming on BMW & BENZ
The newest Automotive diagnostic scan tool Autel MaxiCOM Ultra Lite comes with J-2534 Pass-Thru to work on specific BMW and Benz vehicles to program/ re-flash ECUs like ECM, PCM and etc to update, replace or program the existing software/ firmware in ECUs to troubleshoot complex vehicle problems like driveability, fuel efficiency, power loss, fault codes, and durability of mechanical parts etc.
ECU Programming can be fulfilled via Selective Updates, Control Unit. An Initial Report is generated once you selected Programming/ Coding, which will list every ECU Status such as "Install", "Replace" "Update". Select the ECUs that you need to program and code, Autel MaxiCOM Ultra Lite will perform programming, coding and after-programming treatment for you in one stop.

ECU Coding & Adaptation
With the intelligent auto scan tool Autel MaxiCOM Ultra Lite at your disposal, mechanics can code/ match the adaptive date of the new replaced ECU modules into vehicle on-board system and make customization settings, unlock hidden functions, and improve vehicle performance. For instance, you can:

Change the chimes on the cars
Set how many times its one-touch signal flickers for one touch
Remember settings for Start/ Stop systems
Activate cornering headlights with fog lights
Deactivate some buzzing sounds
Enable multiple functions of the comfort module

NOTE:
1. ECU Programming and Coding may takes longer than other services, so wired USB connection between the J2534 and Ultra Lite scanner is advised to provide the most stable and fastest communication.

2. ECU Coding does not imply changing the software. It only changes pre-programmed options already existent in the software. ECU Programming and Coding is not universal to all the cars, please check compatibility with us before order.

Autel MaxiCOM Ultra Lite Scanner--- Most Needed 40 Services & Resets & Celibrations

 
Oil Reset: reset the oil life system and turn off the oil light after replacing the oil or oil filter.
ABS Brake: discharge the air of the brake system to restore ABS brake sensitivity.
Airbag Reset:reset the Airbag data and clear the collision data.
EPB Reset: maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
BMS:battery registration after replacing the new battery.
IMMO:disable the lost vehicle key fob and program a new key fob (for some Asian cars only).
Power Balance Test: measures each cylinder's drop in RPM, testing its effectiveness compared to the others.
Cam Crank Relearn: resets the positional information in the PCM's memory and replaces it with updated information from the new crankshaft sensor.
SAS Calibration:match the steering angle after replacing the steering angle position sensor, restore the current steering wheel position, clear SAS warning light.
Injector Coding: code the injector after replacing or adjusting to correct the fuel injection volume of each cylinder more accurately.
Suspension Calibration:adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
And more: Throttle, WIN DR ROOF, Seats, Odometer Correction, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Trans Adaption, etc.

NOTE: Service functions are not universal, please kindly check compatibility with the VIN before you place the order.

Autel MaxiCOM Ultra Lite Scanner--- More Reasons that Repair Shops Choose it

Active Tests/ Full Bidirectional Control
Autel MaxiCOM Ultra Lite enables component test/ action test on the all the available modules/ subsystems, working perfectly for troubleshooting and re-check after repair. Active Tests includes Evaporative Emission Test, Injector Buzz Test, Fuel & Valve Tests, Modulate the throttle, Switch Cylinder Correction Off/ On, Turn On/ Off Wipers/ Windows/ Mirror/ Sunroof/ Headlamp/ Sound Horn and so on.

Key Fob Programming
Autel car diagnostic tool Autel MaxiCOM Ultra Lite has IMMO Keys functions (Key Fob Programming). It can clear information of lost keys, relearn a new key and perform key fob/ remote programming to add new a keys. Note: Key fob programming is not universal, please check compatibility with your VIN before order.

VAG Guided Functions
Autel MaxiCOM Ultra Lite provides detailed step-by-step operation guidance to simplify all the complicated functions implement, even a beginner can finish the diagnostics and services at ease. This function is compatible with VW, Audi, Seat, Skoda cars.

Power Balance Test
Autel MaxiCOM Ultra Lite’s power balance test function helps locate the cylinder causing alack of power and not contributing to the engine's balance and performance. Use this test along with a cylinder compression and cylinder leakage test to pinpoint the problem. Power balance test measures each cylinder's drop in RPM, testing its effectiveness compared to the others. Each cylinder's ignitionor fuel is disabled, and the RPM drop is recorded at a particular speed (800-1000 RPM).

Component Matching
With the ability to communicate with ECU modules, Autel MaxiCOM Ultra Lite can match the adaptive data to new component after replacement and make your car run smoothly, especially working for Honda, Chrysler, VAG, GM, Peugeot, Citroen, Mitsubishi, Suzuki, etc.

Online Account Login Service
Autel diagnostic scan tool MaxiCOM Ultra Lite enables Online Account Login Service for VAG vehicles, necessary for access the VW Group official server to perform the special online coding functions. Compatible with Volkswagen / Audi / Skoda / Seat etc.

Top Hardware, 10000+ Widest Vehicle Coverage, Support D-PDU/ J2534/ RP1210/ DoIP/ CAN FD

 
Best of the Best Hardware:

Screen: 12.9-inch 2732 x 2048 Touchscreen, Processor: 2.3GHz + 1.7GHz OCTA-CORE

Memory: 256GB SSD / 4GB RAM, Battery: 18,000mAh

Camera: 16MP Rear/ 5MP Front cameras, VCI: Maxiflash J2534, Charging Docking

10000+ Vehicle Coverage:

Europe: Benz, Sprinter, BMW, Fiat, Land Rover, Maserati, Opel, Peugeot, Porsche, Lancia, LT3, Maybach, Mclaren, Mini, Seat, Skoda, Vauxhall, Renault, Saab, Smart, Volvo, Volkswagen, Abarth, Alfa, Audi, Bentley, Bugatti, Citroen, Dacia, Jaguar, Lambor Ghini

US: Chrysler, Ford, GM, Dodge, Jeep, Lincoln, Tesla

Asia: Acura, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Maruti Suzuki, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota, GTR, Scion...

Support D-PDU/ J2534/ RP1210/ DoIP/ CAN FD:

Autel MaxiCOM Ultra Lite comes with the J2534 VCI which supports D-PDU/ J2534/ RP1210 OE-diagnostic protocols, it can work with OE factory softwares for ECU Programming and coding, Autel Ultra Lite the intelligent scanner is compatible with CAN FD/ DoIP Protocols, working perfectly on GM vehicles produced after 2020, and BMW F G Chassis models, Jaguar & Land Rover after 2017, Volvo after 2018.

13+ Languages:

Different from Autel MaxiSys MS919/ MS919/ Ultra, which has limitation on menu language or using IP, Autel 2022 Newest car diagnostic tool MaxiCOM Ultra Lite is more a global model which supports 13 languages, includes English, Traditional Chinese, Spanish, French, German, Russian, Japanese, Korean, Polish, Portuguese, Swedish, Persian, Turkish, Thai, Vietnamese, Hebrew, Arabic, Indonesian, Italian, Dutch.

No IP Restriction:

Use Autel Ultra Lite Scanner for your global business, no more limitation.

Autel MaxiCOM Ultra Lite Package Content:
1x MaxiCOM Ultra Lite Main Unit
1x MaxiFlash VCI
1x Docking Station
1x Main Cable V2.0
1x USB 2.0 Cable V2
1x AC/DC Adapter(12V)
1x Auxiliary Power Outlet Adapter
2x Spare Fuse 6x30mm
1x Clamp Cable
1x USB to Enthernet Adapter
1x Quick Reference Guide
1x Packing List
1x Soft Cloth
1x Carrying Case 650 x 185 x 430 mm

1*free gift(MV108)