Product
Title |
JLM
Bortec Oil Additive Friction Fighter 250ml (Add to new engine oil) |
Product
Code |
JLM-J06050 |
Description
|
·
Prevent and reduce timing chain
rattle ·
Safe for use with DPFs ·
Use with new engine oil ·
One bottle will treat up to 5L of
engine oil
JLM
J06050 Bortec Oil Additive - Engine Friction Reduction is the
latest-generation additive that enables engine oil to provide enhanced
protection of combustion engines and reduce fuel consumption. JLM Bortec Oil
Additive contains no solid particles. This means it is completely liquid and
even more effective than conventional engine oil and drag-reducing additives
in minimising wear and frictional resistance between moving parts in
combustion engines.
JLM
Bortec Oil Additive is a boron-based ceramic chemical additive with numerous
benefits for protecting metal parts. The benefits of boron in engine oil
include reducing friction, preventing corrosion due to moisture, stabilising
thermal oxidation, reducing moisture sensitivity and preventing sludge
formation.
Benefits:
·
Reduces emission of harmful gases ·
Reduces engine noise ·
Suitable for all combustion engines ·
Can be mixed with all brands and
types of engine oil ·
Does not clog oil filters ·
Not harmful to the catalytic
converter ·
Suitable for low and mid SAPS
engines
Because
there are no solid particles (such as ash) in the additive, it performs
particularly well in areas of the engine subject to high temperatures,
pressures and friction. As well as reducing friction, JLM Bortec Oil Additive
has a powerful cleaning effect that prevents excessive wear.
JLM
Bortec Oil Additive works well with traditional friction reducers contained
in modern engine oil. The ceramic coating, of course, also sticks to the
parts when the engine is cold. This means there is always a lubricating film
on the cold parts when the engine is started. The antioxidant in boron
provides the engine oil with better protection against ageing, enabling it to
maintain optimal performance for a long time.
Thanks
to the unique constituents of JLM Bortec Oil Additive, the additive offers
ultimate protection against wear and tear in moving parts such as pistons,
piston rings, bearings and valves. Since JLM Bortec Oil Additive
substantially reduces friction between moving parts, there is less internal
resistance. The result is that wear and tear on the parts is significantly
reduced and fuel consumption drops.
Even
for an engine that is no longer new, JLM Bortec Oil Additive offers added
value. Existing wear will slow down, while the additive's cleaning effect
means that engine performance will improve again and fuel consumption will
stabilise or even decrease.
Product Usage:
For
best results, first change the engine oil and replace the oil filter. When
filling with engine oil, leave room for 250ml of JLM Bortec Oil Additive.
Bring
the engine up to operating temperature and then turn it off. Add
the contents of the 250ml bottle of JLM Bortec Oil Additive to the engine
through the engine oil filling opening. Restart
the engine and let it run for a few minutes to thoroughly mix the oil and
additive. Turn off the engine and check the oil level. One
250ml bottle of JLM Bortec Oil Additive treats 4 to 6 litres of engine oil.
Recommended use at every oil change.
Please
review the nominated handling/delivery times for this item and ensure this
meets with your expected time frame. |