Product parameters:
[Material]: Silicone Polymer
[Product name]: transparent body anti-collision sticker
[Product color]: transparent
[Product size]: Length: 7M,Width: 5CM,Thickness: 0.05mm
[Product name]: transparent body anti-collision sticker
[Product color]: transparent
[Product size]: Length: 7M,Width: 5CM,Thickness: 0.05mm
[Product material]: transparent anti-nano glue
[Product weight]: 240g
[Product packaging]: 1 pcs
[Suitable models]: General purpose
[Installation position]: door, threshold, etc.
[Product function]: Anti-collision, anti-scratch and wear-resistant
[Installation method]: Paste installation
[Product weight]: 240g
[Product packaging]: 1 pcs
[Suitable models]: General purpose
[Installation position]: door, threshold, etc.
[Product function]: Anti-collision, anti-scratch and wear-resistant
[Installation method]: Paste installation
Note: The size is manually measured with an error of 0-5cm
The recommended installation plan is as follows:
plan 1:
Side and rear door sill strips: 40*7cm, 2pcs
Side front door sill strip: 60*7cm, 2pcs
The threshold of the trunk: 104*7cm, 1pcs
4 corners attached to the car side to prevent collision: 49*7cm, 4pcs
plan 2:
Side and rear door sill strips: 40*7cm, 2pcs
Side front door sill strip: 60*7cm, 2pcs
The threshold of the trunk: 104*7cm, 1pcs
Sticker on both sides of the car's back door: 98*7cm, 2pcs
The above are just some of the solutions, there are more DIY solutions, depending on the actual installation situation
Side and rear door sill strips: 40*7cm, 2pcs
Side front door sill strip: 60*7cm, 2pcs
The threshold of the trunk: 104*7cm, 1pcs
4 corners attached to the car side to prevent collision: 49*7cm, 4pcs
plan 2:
Side and rear door sill strips: 40*7cm, 2pcs
Side front door sill strip: 60*7cm, 2pcs
The threshold of the trunk: 104*7cm, 1pcs
Sticker on both sides of the car's back door: 98*7cm, 2pcs
The above are just some of the solutions, there are more DIY solutions, depending on the actual installation situation
How to Install:
1.Find the correct installing position
2.Clean the surface of installation position, ensure its clean, no oil, grease, wax, etc
3.Place the item on the exact position carefully, paste the trim, press it to ensure good adhesion
4.Please dont wash your car within 24 hours, ensure it can be get the best bond strength.
2.Clean the surface of installation position, ensure its clean, no oil, grease, wax, etc
3.Place the item on the exact position carefully, paste the trim, press it to ensure good adhesion
4.Please dont wash your car within 24 hours, ensure it can be get the best bond strength.
On 22-Sep-2023 at 09:36:20 BST, seller added the following information: