Tips:
Affected by Epidemic Recently, due to shortage of workers, the online update information and deliverey will have some delay. Please don't worry, just contact me, I will keep tracking and update.
Wiring method: brown and blue wires are connected to the power supply, red and blue wires are connected to the load
After installation, follow the steps below to test:
1. Turn the 5" position of the coding switch to the ON position, and the rest are in the initial position;
2. Turn on the power and the sensor will enter a stable working state after the light goes out;
3. After sensing once, the light will turn on, and it will automatically turn off after about 5 seconds;
4. If the coding switch is turned to the ON position and the light does not light up during daytime testing, use an opaque object (such as black cloth) to cover the photoresistor and sense it, the light will turn on. If there is no subsequent induction, the light will remain on. It will automatically turn off after about 5 seconds;
5. When the time is not selected, the sensor backlight will be on for a long time.
Feature:
Sensor can be adjusted to work Both in a Day and Night light or can be set to work only in a Night Light
Easy to Install
Adjustable Motion Sensitivity up to 6 meters
Adjustable Light Working Time
Installation Manual Included!
Installation:
1st dip if its ON it will only detect movement in a night light. If its OFF it will also work in the day time and Night time.
2nd dip is a sensitivity when its ON it is set on a low sensitivity when its OFF it is set on a high sensitivity (it can detect wind and other non human movement)
Rest Dips are light time delay. 5 sec, 30 sec, 1, 3, 5 or 8 Minutes
Sensor Box Measurements: 5.6 cm x 3.4 cm x 2.4 cm (Sensor head wire is detachable from the box so it would fit through a hole when installing)
Detection Angle: ceiling installation 360°, horizontal installation 100°Detection Range: 6mIP Rating: IP20Time Setting: 5Sec.30Sec.1.3.5.8Min.OffPower Source: 220-240V/ACRated Load: 800WMax Power Frequency: 50/60HzAmbient Light: Work Temperature: -10~+40
Package included:
1 x PIR Sensor Detector
1 x Use manual