XK-2 Woodworking Oblique Hole Puncher 9.5MM Woodworking DIY Tool
Product Properties
Material: aluminum alloy
Standard Metric English System
Scope of application: Home decoration
Size 330 * 145 * 85
Applicable scene decoration
Weight: 2 (kg)
Material: aluminum alloy
Standard Metric English System
Scope of application: Home decoration
Size 330 * 145 * 85
Applicable scene decoration
Weight: 2 (kg)
Product Information
Product name: xk-2 woodworking inclined hole machine
Material: Mold steel, aluminum alloy 6061
Features: precision manufacturing, quality assurance, precise calibration, and easy operation
Usage: Panel furniture punching
Product name: xk-2 woodworking inclined hole machine
Material: Mold steel, aluminum alloy 6061
Features: precision manufacturing, quality assurance, precise calibration, and easy operation
Usage: Panel furniture punching
Product comes with:
1. xk-2 inclined hole locator base
2. xk-2 inclined hole drill
3.9.5mm drill bit (with limit ring)
4. Screwdriver
5. Allen wrench
1. xk-2 inclined hole locator base
2. xk-2 inclined hole drill
3.9.5mm drill bit (with limit ring)
4. Screwdriver
5. Allen wrench
Operation method :
1. What is the thickness of the wooden board? Adjust the corresponding scale number with the arrow, such as 18mm wooden board. Adjust the arrow to 18, and then tighten the red screw
2. Insert the drill bit into the steel sleeve, touch the bottom of the adjustment block, lift it by about 3mm, and then lock the limit ring
3. The electric drill must rotate in a positive direction and cannot drill in a reverse direction. It is recommended to adjust it to above 1500 revolutions. When drilling, the speed needs to be uniformly pressed down. It is prohibited for the drill to come into contact with the wooden board before turning it on. When drilling, the drill needs to be retracted several times to facilitate the discharge of wood chips;
4. Different thicknesses of boards require different screw length specifications. Before tightening the screws, the splicing of two boards needs to be pre fixed. It is recommended to use a dedicated diagonal hole clamp. When using a screwdriver head for an electric drill, the drill needs to be adjusted to a low speed and high torque gear;
5. Install plastic plugs
