Specifications:
Model Number: 12888
SubjectName: Quartz Clock Sweep Seconds Movement
Size:Case 56*56mm
Movement case material: Plastic
Parts within movement material: Copper wire and Plastic
Clock hand Material: Aluminum
Dial Fixation: Centre Screw
Second hand motion: SweepAccuracyWithin ±30seconds deviation each month (in normal temperature)
Battery: one 1.5V Carbon-zinc batteries only,not included. Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.
Movement Net Weight: 23g
Parts: Nut and Clock hands
Characteristic: MuteUsed for: Prepair original clock,DIY clock
This movement can be used when DIY Clock,it's a clock accessory.
You can also use it to change your orriginal bad clock movement,this will save much money because you didn't need to repalce the whole clock
Packing: Simple and Safe packing
Package included：as shown in the picture
Customer's tips for selecting a shaft:
1. the thickness of your clock plate must be at least 1mm shorter than the thread of the movement (1.5-2mm is the best).
2. If there is no glass on the clock face, it doesn't matter if the shaft is a little longer.
3. If there is glass on the clock face, the shaft length should be just right to prevent the hands from touching the glass and causing the clock to run out of time.
Instruction for installation
1. This under current equipment fit 1.5V Carbon-zinc battery Only,Please Do not use high current batteries,rechargeable batteries,they will damage the movement.
2. When you install Clock hand, just press down the clock hand to the axis vertically,do not need to twist the hand.
3. Check three hands,make sure they didn't meet each other,first place three hands all point 12 and then adjust wheel gear to current time,when adjust take note that three hands move fluently,if meet split it
4. For Young Town movement is one of the best quartz clock movements in the world,it move super mute keep better time and require less maintenance,when you use correct battery and install clock hand correctly,you will be very pleased with it's work.
