eBay

Specs: Thickness: 1.50" | Vehicle Bolt Pattern: 5x5.50 | Wheel Lug Pattern: 5 x 5.50 | ID (Vehicle Hub Size): 77.8mm | OD (Wheel Hub Size): 77.8mm | Stud and Lugs Thread: M14 1.50 | Color: Black | Quantity: 2
Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift lowering kits and wider, larger, or high traction tires.
Hub Centric Spacer provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This spacer is for a wheel hub diameter of 77.8mm only.
Our spacers are made from FORGED aircraft quality 6060-T6 aluminum alloy. Each spacer is anodized black which significantly enhances the hardness and corrosion resistance. Studs are SAE 10.9. CNC lathes and milling machines ensures a precise fit to your vehicle hub eliminating possible vibration.
Always use CONFIRMED FIT to validate product fitment to your vehicle.

Product Description

Bolt Pattern:

5 x 139.7mm (5 x 5.50")

Center Bore:

77.80mm (OD)

Thread Size:

M14 x 1.50

Available Thickness:

1.25", 1.50", 1.75", 2.00"

Aircraft Quality 6061-T6 Aluminum

Our spacers are made from FORGED aircraft quality 6061-T6 aluminum alloy. Each spacer is anodized black which significantly enhances hardness and corrosion resistance.

12.9 Class Studs

Our wheel studs are made to SAE 12.9 standards.

CNC Automatic Processing

Our adapters are produced using CNC lathes and milling machines. CNC ensures a precise fit to your vehicle hub eliminating possible vibration.

Installation Instructions

Clean the studs thoroughly and remove excess dirt, oil, and grease.
Slide spacer onto the vehicle studs, the center bore of the adapter will fit tightly onto the vehicles hub.
Thread the provided lug nuts onto the studs with the TAPERED end facing the spacers. Install lug nuts by hand FIRST. After, finish tightening lugs in a crossing pattern with a torque wrench as per manufacturer recommended torque specifications.
Slide the wheel onto the spacer, the wheel should fit tightly onto the adapter hub.
Finally, secure the wheel to the spacer using the factory lug nuts and torque wrench as per manufacturer recommended torque specifications.