• Fitment:
  •  
  • 1995-2015 Hyundai Accent
    1992-2015 Hyundai Elantra
    2013-2014 Hyundai Elantra Coupe
    2013-2015 Hyundai Elantra GT
    2009-2015 Hyundai Genesis
    2010-2015 Hyundai Genesis Coupe
    2001-2015 Hyundai Santa Fe
    1992 Hyundai Scoupe
    1990-2015 Hyundai Sonata
    1997-2001 2003-2008 Hyundai Tiburon
    2012-2015 Hyundai Veloster
    2010-2015 Kia Forte
    2001-2015 Kia Optima
    2001-2015 Kia Rio
    2010-2015 Kia Soul
  • Notes:
  • 14" Inch Electric Radiator Cooling Fan For 1990-2015 Hyundai Sonata & Kia Optima

    Fitment:

     

    1995-2015 Hyundai Accent
    1992-2015 Hyundai Elantra
    2013-2014 Hyundai Elantra Coupe
    2013-2015 Hyundai Elantra GT
    2009-2015 Hyundai Genesis
    2010-2015 Hyundai Genesis Coupe
    2001-2015 Hyundai Santa Fe
    1992 Hyundai Scoupe
    1990-2015 Hyundai Sonata
    1997-2001 2003-2008 Hyundai Tiburon
    2012-2015 Hyundai Veloster
    2010-2015 Kia Forte
    2001-2015 Kia Optima
    2001-2015 Kia Rio
    2010-2015 Kia Soul

    Notes:

    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

     

    Step 1: Locate the Radiator Cooling Fan

    Locating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.

     

    Step 2: Disconnect the Power Supply

    On the fan motor is an electric cable running towards the engine. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later.

     

    Step 3: Remove the Fan Housing

    Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well.  A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table.

     

    Step 4: Remove the Radiator Cooling Fan and the Fan Motor

    The fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide if off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.

     

    Step 5: Attach the Replacement  Radiator Cooling Fan and Fan Motor

    Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor into the car electrical system using the electrical tape guide you made in step 2. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.


    Item Specifics
    Manufacturer Part Number :PMT826252BS01
    Warranty :1 Year
    Brand :Partsmarkets
    Product Type :Cooling Fan
    Placement on Vehicle :Front
    Fitment :Direct Replacement
    Height :8CM
    Width :35.5CM
    Length :38CM
    Fan Color :Black
    Blade :8
    Plug Pin :2
    Maximum Fan CFM :2000 CFM
    Maximum Fan RPM :2250 RPM
    AMP Draw :6.6
    Voltage :12V
    AMP Draw :6.6
    Voltage :12V

    Payment

    We accept paypal only

    We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!

    Shipping

    1. Items will be shipped within 24 hours after getting your verified payment.

    2. 2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time

    Returns

    1.Defective products can be exchanged or returned for full price refund within 30days after you receive the item.

    2.Any returning or exchanging item must be in new condition and cannot be tempered.

    3. Buyers are responsible to pay the return shipping fee or exchange shipping fee.

    4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don't need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need.

    Feedback

    We will leave positive feedback to buyer as soon as buyer pays for the item. Leaving Negative feedback or Netural Feedback is never a good way to resolve problem .We hightly appreciate that you can refer to us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.

    Shop Category
    Picture
    14" Inch Electric Radiator Cooling Fan For 1990-2015 Hyundai Sonata & Kia Optima

    Fitment:

     

    1995-2015 Hyundai Accent
    1992-2015 Hyundai Elantra
    2013-2014 Hyundai Elantra Coupe
    2013-2015 Hyundai Elantra GT
    2009-2015 Hyundai Genesis
    2010-2015 Hyundai Genesis Coupe
    2001-2015 Hyundai Santa Fe
    1992 Hyundai Scoupe
    1990-2015 Hyundai Sonata
    1997-2001 2003-2008 Hyundai Tiburon
    2012-2015 Hyundai Veloster
    2010-2015 Kia Forte
    2001-2015 Kia Optima
    2001-2015 Kia Rio
    2010-2015 Kia Soul

    Notes:

    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

     

    Step 1: Locate the Radiator Cooling Fan

    Locating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.

     

    Step 2: Disconnect the Power Supply

    On the fan motor is an electric cable running towards the engine. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later.

     

    Step 3: Remove the Fan Housing

    Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well.  A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table.

     

    Step 4: Remove the Radiator Cooling Fan and the Fan Motor

    The fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide if off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.

     

    Step 5: Attach the Replacement  Radiator Cooling Fan and Fan Motor

    Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor into the car electrical system using the electrical tape guide you made in step 2. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.

    Item Specifics
    Manufacturer Part Number :PMT826252BS01
    Warranty :1 Year
    Brand :Partsmarkets
    Product Type :Cooling Fan
    Placement on Vehicle :Front
    Fitment :Direct Replacement
    Height :8CM
    Width :35.5CM
    Length :38CM
    Fan Color :Black
    Blade :8
    Plug Pin :2
    Maximum Fan CFM :2000 CFM
    Maximum Fan RPM :2250 RPM
    AMP Draw :6.6
    Voltage :12V
    AMP Draw :6.6
    Voltage :12V


    We accept paypal only

    We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!

    1. Items will be shipped within 24 hours after getting your verified payment.

    2. 2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time

    1.Defective products can be exchanged or returned for full price refund within 30days after you receive the item.

    2.Any returning or exchanging item must be in new condition and cannot be tempered.

    3. Buyers are responsible to pay the return shipping fee or exchange shipping fee.

    4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don't need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need.

    We will leave positive feedback to buyer as soon as buyer pays for the item. Leaving Negative feedback or Netural Feedback is never a good way to resolve problem .We hightly appreciate that you can refer to us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.


    All rights reserved.