Categories
2.42" OLED Display Board 128*64 HD Display Screen IC I2C SPI Serial SSD1309 US
Description
Product Description:
This is a 2.42-inch OLED display module with a resolution of 128x64, in which the light-emitting electroluminescent layer is a thin film of organic compound that emits light in response to current.
The OLED display module works without backlight and can emit light by itself.
Under low ambient light conditions such as darkrooms, OLED screens can achieve higher contrast than LCDs.
The response time of the OLED display module is also much faster than that of the LCD.
The small size display is suitable for MP3, feature phones, smart health devices, etc.
The seventh pin CS signal is led out by default; if not needed, you can solder R18, and then the CS signal is directly grounded.
SPI communication or I2C communication can be switched by configuring three resistors R3, R4, R5.
As for IIC communication, the resistance on R4 needs to be moved to R3, and R5 is welded with a 0 ohm resistor.
This is a 2.42-inch OLED display module with a resolution of 128x64, in which the light-emitting electroluminescent layer is a thin film of organic compound that emits light in response to current.
The OLED display module works without backlight and can emit light by itself.
Under low ambient light conditions such as darkrooms, OLED screens can achieve higher contrast than LCDs.
The response time of the OLED display module is also much faster than that of the LCD.
The small size display is suitable for MP3, feature phones, smart health devices, etc.
The seventh pin CS signal is led out by default; if not needed, you can solder R18, and then the CS signal is directly grounded.
SPI communication or I2C communication can be switched by configuring three resistors R3, R4, R5.
As for IIC communication, the resistance on R4 needs to be moved to R3, and R5 is welded with a 0 ohm resistor.
The main parameters:
Size: 2.42 inches
Resolution: 128*64
Power supply voltage: 3.3V
Color: green/white/blue/yellow
Size: 2.42 inches
Resolution: 128*64
Power supply voltage: 3.3V
Color: green/white/blue/yellow
SPI interface definition:
GND: power ground
VCC: Positive power supply
SCL: clock line
SDA: Data cable
RES: reset line
DC: data/command
CS: Chip selection
GND: power ground
VCC: Positive power supply
SCL: clock line
SDA: Data cable
RES: reset line
DC: data/command
CS: Chip selection
List:
2.42-inch OLED display *1
2.42-inch OLED display *1
2.42" OLED Display Board 128*64 HD Display Screen IC I2C SPI Serial SSD1309 US
Description
Product Description:
This is a 2.42-inch OLED display module with a resolution of 128x64, in which the light-emitting electroluminescent layer is a thin film of organic compound that emits light in response to current.
The OLED display module works without backlight and can emit light by itself.
Under low ambient light conditions such as darkrooms, OLED screens can achieve higher contrast than LCDs.
The response time of the OLED display module is also much faster than that of the LCD.
The small size display is suitable for MP3, feature phones, smart health devices, etc.
The seventh pin CS signal is led out by default; if not needed, you can solder R18, and then the CS signal is directly grounded.
SPI communication or I2C communication can be switched by configuring three resistors R3, R4, R5.
As for IIC communication, the resistance on R4 needs to be moved to R3, and R5 is welded with a 0 ohm resistor.
This is a 2.42-inch OLED display module with a resolution of 128x64, in which the light-emitting electroluminescent layer is a thin film of organic compound that emits light in response to current.
The OLED display module works without backlight and can emit light by itself.
Under low ambient light conditions such as darkrooms, OLED screens can achieve higher contrast than LCDs.
The response time of the OLED display module is also much faster than that of the LCD.
The small size display is suitable for MP3, feature phones, smart health devices, etc.
The seventh pin CS signal is led out by default; if not needed, you can solder R18, and then the CS signal is directly grounded.
SPI communication or I2C communication can be switched by configuring three resistors R3, R4, R5.
As for IIC communication, the resistance on R4 needs to be moved to R3, and R5 is welded with a 0 ohm resistor.
The main parameters:
Size: 2.42 inches
Resolution: 128*64
Power supply voltage: 3.3V
Color: green/white/blue/yellow
Size: 2.42 inches
Resolution: 128*64
Power supply voltage: 3.3V
Color: green/white/blue/yellow
SPI interface definition:
GND: power ground
VCC: Positive power supply
SCL: clock line
SDA: Data cable
RES: reset line
DC: data/command
CS: Chip selection
GND: power ground
VCC: Positive power supply
SCL: clock line
SDA: Data cable
RES: reset line
DC: data/command
CS: Chip selection
List:
2.42-inch OLED display *1
2.42-inch OLED display *1
