Motorcycle Car Tyre Puncture Emergency Repair Set Kit Plug Tools Tubeless 6PCS
Features:
Made of high quality material, not easy to be damaged.
High quality parts with strong endurance. Not easy to deform!
Spiral design easily passes through tires for easy and effortless debris removal.
Easy to use and store.
Durable metal drill bit, long service life.
Package Content.
1x Rasper Tool.
1x Needle Tool.
1x Rubber Solution.
3x Repair Strips.
Method of use:
1. Circle the puncture area and pull out the puncture.
2. Use the tire repair probe to detect the direction of penetration of the puncture and insert it in the direction of the puncture and pump it to remove dust and debris inside the puncture.
3. Cut one end of the tape into a beveled opening and put it through the eyelet at the front of the needle insertion tool, so that the length of the tape at both ends of the eyelet is basically the same.
4. Insert the needle with the adhesive strip into the tire along the broken hole, make sure the adhesive strip is inserted into 2/3 of the length (you must make sure that the cold patch adhesive strip penetrates the tire body to avoid slipping out after inflation), and rotate the needle 360 degrees and then pull out the needle.
5. Cut off the remaining adhesive strip outside the tire.
If you need Seal Strip, you can buy it by clicking the link below:
Reminder:
1. Must use the probe to probe the direction of the hole, in order to ensure that the insertion direction and position of the adhesive strip and the nail hole penetration direction, otherwise it will produce air leakage, for example, the direction of the broken hole and the tread angle slanting 50 degrees, the probe and the insertion of the needle should be operated in accordance with this slanting degree.
2. After confirming that the rubber strip is enough to penetrate the tire, rotate the strip and insert the needle tool for a circle (360 degrees) and then pull it out to make sure that the rubber strip squeezes the wound of the puncture hole and forms a rotating knot in the tire to avoid air leakage.
3. If it is a deeper diagonal hole wound, you must ensure the length of the rubber strip to ensure that the rubber strip can penetrate the tire.
