1 x Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor CL57T V4.1
1 x 2Nm Nema 23 Closed Loop Stepper Encoder 1000CPR
1 x MEAN WELL LRS-200-36 200W 36VDC 5.9A 115/230VAC Enclosed Switching Power Supply
1 x 1.7m Long Encoder Extension Cable for Closed Loop Stepper Driver
1 x RV-4 AWG20 1.7m Long Motor Extension Cable with GX16 Aviation Plug for Nema 23 and 24 Closed Loop Stepper Motors(Just for aviation-plug model motor)
1 x RS232 Debugging Cable
Motor Specification
Manufacturer Part Number: 23HS30-5004D-E1000
Number of phase: 2
Step Angle: 1.8 deg
Holding Torque: 2.0 Nm(283.28 oz.in)
Rated Current/phase: 5.0 A
Phase Resistance: 0.42 ohms
Inductance: 1.7 mH ± 20%(1KHz)
Frame Size: 57 x 57 mm
Body Length: 101mm
Shaft Diameter: Φ8mm
Shaft Length: 21mm
D-CUT Shaft Length: 15mm
Lead Length: 300mm
Encoder Specification
Output Circuit Type: Differential type
Encoder Resolution: 1000
Output Signal Channels: 3 channels
Supply Voltage Min: 4.5V
Supply Voltage Max: 5.5V
Output Current: 100mA MAX
Output High Voltage: ≥Vcc-0.4V
Output Low Voltage: ≤0.4V
Output Frequency Max: 1.85MHZ
Power Supply Specification
Part Number: LRS-200-36 36V DC 5.9A output AC input voltage range: 90 ~ 132VAC Rated power: 212.4W Withstand 5G vibration test Withstand 300VAC surge input for 5 second High efficiency, long life and high reliability
3Nm Nema 23 kit included:
1 x Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor 1 x Nema 23 Closed Loop Stepper Motor 3.0Nm/424.83oz.in Encoder 1000CPR 1 x Mean Well LRS-200-36 212.4W 36V 5.9A Enclosed Switching Power Supply 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver 1 x RV-4 AWG20 1.7 m(67") Long Motor Extension Cable with GX16 Aviation Plug for Nema 23 and 24 Closed Loop Stepper Motors(Just for aviation-plug model motor)
1 x RS232 Debugging Cable
Motor Specification
Manufacturer Part Number: 23HS45-4204D-E1000 Number of phase: 2 Step Angle: 1.8deg Holding Torque: 3.0Nm(424.83oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.82ohms Inductance: 3.6mH ± 20%(1KHz) Frame Size: 57 x 57mm Body Length: 138mm Shaft Diameter: Φ8mm Shaft Length: 21mm D-CUT Shaft Length: 15mm Lead Length: 300mm
Power Supply Specification
Brand MEANWELL Part Number: LRS-200-36
36VDC 5.9A output AC input voltage range:90 ~ 132VAC AC input range selectable by switch Withstand 300VAC surge input for 5 second Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection 1U low profile Withstand 5G vibration test LED indicator for power on No load power consumption<0.75W 100% full load burn-in test High operating temperature up to 70℃ Operating altitude up to 5000 meters (Note.8) High efficiency, long life and high reliability 3 years warranty
Motor and Encoder Connection
PIN
1
2
3
4
Motor
A+
A-
B+
B-
PIN
2
3
1
13
11
12
Encoder
VCC
EGND
EA+
EA-
EB+
EB-
Motor Extension Cable Connection
PIN
1
2
3
4
Color
Black
Green
Red
Blue
Encoder Extension Cable Connection
PIN
2
3
1
13
11
12
Color
Red
White
Black
Blue
Yellow
Green
PLEASE NOTE: The thick black wire can be used for shielding, but it is not required, so you can leave it unconnected.
Am 07.12.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: