This module serves as the program download backplane for the ESP32-CAM WIFl camera module, eliminating the hassle of wiring. Simply plug the ESP32-CAM into the backplane and connect the USB Type-C cable. The bottom plate leads out all the pins of the ESP32-CAM module, as well as external wires. When not plugged into ESP32-CAM, it can also be used as a regular USB to 3.3V TTL serial port tool.

Usage:

Before use, install the CH340 USB to TTL serial port driver for the computer, and identify the COM port in the device management. Due to the integrated reset button on the ESP32-CAM module, there is no additional reset button on this motherboard, and a 100 pin switch is introduced. When downloading the program, simply hold down the button and do not release it, which is equivalent to pulling down the 100 pin. Then, press the reset button on the ESP32-CAM module again to enter the download mode, Click on the download option on the download software again, wait for the program to download.