Categories
AC110V-240V 50HZ/60HZ Smart Home Motion Sensor Light Switch 7M Sensing Range
Description
Features
1. Sensitive sensing, long sensing distance
2. Adopting high-precision photosensitive resistor, small error.
3. Pure copper terminal, stable conductivity
4. Stable performance, stable current and low power consumption.
5. Compact size, using STM chip technology.
6. Wide range of use, applicable to incandescent lamps, energy-saving lamps, fluorescent lamps, fluorescent lamps, LED lamps, exhaust fans and so on.
2. Adopting high-precision photosensitive resistor, small error.
3. Pure copper terminal, stable conductivity
4. Stable performance, stable current and low power consumption.
5. Compact size, using STM chip technology.
6. Wide range of use, applicable to incandescent lamps, energy-saving lamps, fluorescent lamps, fluorescent lamps, LED lamps, exhaust fans and so on.
Specification
Operating voltage: AC110V-240V 50HZ/ 60HZ
Load power: bulb ≤ 200W, fluorescent lamp ≤ 60W.
Applicable loads: incandescent lamps, energy-saving lamps, fluorescent lamps, fluorescent lamps, LED lamps, exhaust fans, etc.
Power consumption: less than 0.02W.
Wiring: two-wire connection, the same as ordinary single-control switch connection, can directly replace the wall switch to use.
Sensing range: about 7 meters, 140 degrees circumferential cone angle.
Brightness range: below 8LUX.
Delay time: 40 seconds after the person leaves the sensing range, the power will be cut off automatically.
Operating voltage: AC110V-240V 50HZ/ 60HZ
Load power: bulb ≤ 200W, fluorescent lamp ≤ 60W.
Applicable loads: incandescent lamps, energy-saving lamps, fluorescent lamps, fluorescent lamps, LED lamps, exhaust fans, etc.
Power consumption: less than 0.02W.
Wiring: two-wire connection, the same as ordinary single-control switch connection, can directly replace the wall switch to use.
Sensing range: about 7 meters, 140 degrees circumferential cone angle.
Brightness range: below 8LUX.
Delay time: 40 seconds after the person leaves the sensing range, the power will be cut off automatically.
Note
1. Overloading is strictly prohibited, one switch load 1-2 lights.
2. It is strictly prohibited to connect fire wire and zero wire at the same time.
3. 30 seconds after the initial power on to enter the normal operating state.
4. The installation position should be compatible with the range of human activities, and rainwater intrusion is strictly prohibited.
1. Overloading is strictly prohibited, one switch load 1-2 lights.
2. It is strictly prohibited to connect fire wire and zero wire at the same time.
3. 30 seconds after the initial power on to enter the normal operating state.
4. The installation position should be compatible with the range of human activities, and rainwater intrusion is strictly prohibited.
List
1 x Induction switch
1 x Induction switch
AC110V-240V 50HZ/60HZ Smart Home Motion Sensor Light Switch 7M Sensing Range
Description
Features
1. Sensitive sensing, long sensing distance
2. Adopting high-precision photosensitive resistor, small error.
3. Pure copper terminal, stable conductivity
4. Stable performance, stable current and low power consumption.
5. Compact size, using STM chip technology.
6. Wide range of use, applicable to incandescent lamps, energy-saving lamps, fluorescent lamps, fluorescent lamps, LED lamps, exhaust fans and so on.
2. Adopting high-precision photosensitive resistor, small error.
3. Pure copper terminal, stable conductivity
4. Stable performance, stable current and low power consumption.
5. Compact size, using STM chip technology.
6. Wide range of use, applicable to incandescent lamps, energy-saving lamps, fluorescent lamps, fluorescent lamps, LED lamps, exhaust fans and so on.
Specification
Operating voltage: AC110V-240V 50HZ/ 60HZ
Load power: bulb ≤ 200W, fluorescent lamp ≤ 60W.
Applicable loads: incandescent lamps, energy-saving lamps, fluorescent lamps, fluorescent lamps, LED lamps, exhaust fans, etc.
Power consumption: less than 0.02W.
Wiring: two-wire connection, the same as ordinary single-control switch connection, can directly replace the wall switch to use.
Sensing range: about 7 meters, 140 degrees circumferential cone angle.
Brightness range: below 8LUX.
Delay time: 40 seconds after the person leaves the sensing range, the power will be cut off automatically.
Operating voltage: AC110V-240V 50HZ/ 60HZ
Load power: bulb ≤ 200W, fluorescent lamp ≤ 60W.
Applicable loads: incandescent lamps, energy-saving lamps, fluorescent lamps, fluorescent lamps, LED lamps, exhaust fans, etc.
Power consumption: less than 0.02W.
Wiring: two-wire connection, the same as ordinary single-control switch connection, can directly replace the wall switch to use.
Sensing range: about 7 meters, 140 degrees circumferential cone angle.
Brightness range: below 8LUX.
Delay time: 40 seconds after the person leaves the sensing range, the power will be cut off automatically.
Note
1. Overloading is strictly prohibited, one switch load 1-2 lights.
2. It is strictly prohibited to connect fire wire and zero wire at the same time.
3. 30 seconds after the initial power on to enter the normal operating state.
4. The installation position should be compatible with the range of human activities, and rainwater intrusion is strictly prohibited.
1. Overloading is strictly prohibited, one switch load 1-2 lights.
2. It is strictly prohibited to connect fire wire and zero wire at the same time.
3. 30 seconds after the initial power on to enter the normal operating state.
4. The installation position should be compatible with the range of human activities, and rainwater intrusion is strictly prohibited.
List
1 x Induction switch
1 x Induction switch
