Will it improve my signal?
The elements in this antenna are similar to those inside most cellular and WiFi Internet gateway/routers. Placing the antenna next to the gateway/router will not improve your signal. Placing this antenna away from the gateway/router in a location with better signal coverage will improve signal quality and data throughput speeds. Maximize the values of SINR and RSRQ, not RSSI, RSRP or "bars".
After connecting the Maswell 2X2 MIMO High Gain Antenna, ensure you switch to the external antenna mode in your router or network settings. This step is crucial because, by default, routers use their internal antennas. If you don't switch to the external antenna option, the internal antenna will remain active, and the external antenna won't work as intended. So, for the best results, don't forget to make this important adjustment.
Frequency Range | 700-6000 Mhz |
Polarization | Linear |
Gain | Up to 4.5 dBi |
V.S.W.R | <2.0 |
Impedance | 50 Ohm |
Cable | 3M coaxial cable |
Connector Type | 2 Leads SMA-Male with TS9 Adapters |
Operating Temperature | -40°C to +85°C |
Relative Humidity | Up to 95% |
Vibration | 10 to 55Hz with 1.5mm amplitude for 2 hours |
Material | ABS |