AUTOMATIC TRANSMISSION SERVICE KIT MOPAR ATF+4 FOR DODGE RAM1500 4.7L 5.7L 4WD

This product data sheet is originally written in English.




AUTOMATIC TRANSMISSION SERVIVCE KIT (4WD ONLY)


- ATF+4 Mopar MS-9602 7L (APPROX. 6.6L REQUIRED)

- TRANSMISSION FLUID PRIMARY FILTER (FLAT TYPE) w/O-RING 

- TRANSMISSION COOLER FILTER (CANISTER TYPE) 

- TRANSMISSION PAN/SUMP GASKET


TRANSMISSIONS: 

45RFE/ 545RFE/ 65RFE/ 66RFE 

(4-WHEEL DRIVE MODELS ONLY):


Chrysler ASPEN 2007-2009 4.7L V8/ 5.7L HEMI V8

Dodge DAKOTA 2000-2002 2.5L

Dodge DAKOTA 2004-2005 AND 2009 3.7L V6

Dodge DAKOTA 2000-2003 3.9L V6 / 5.9L V8

Dodge DAKOTA 2000-2010 4.7L V8

Dodge DURANGO 2004-2005 AND 2009 3.7L V6

Dodge DURANGO 2000-2009 4.7L V8

Dodge DURANGO 2000 5.2L V8

Dodge DURANGO 2004-2009 5.7L HEMI V8

Dodge DURANGO 2002-2003 5.9L V8

Dodge RAM1500 2002-2010 3.7L V6

Dodge RAM1500 2006-2006 and 2008-2010 4.7L V8 / 5.7L HEMI V8

Dodge RAM2500 2003-2009 5.9L CUMMINS

Dodge RAM2500 2007-2010 6.7L CUMMINS

Dodge RAM2500 2003 8.0L V10

Dodge RAM2500 2003-2006 and 2008-2010 5.7L HEMI V8

Dodge RAM3500 2003-2007 5.9L CUMMINS

Dodge RAM3500 2007-2010 6.7L CUMMINS

Dodge RAM3500 2003 8.0L V10

Dodge RAM3500 2003-2006 and 2008-2009 5.7L HEMI V8

Jeep COMMANDER 2006-2008 3.7L V6

Jeep COMMANDER 2006-2009 4.7L V8

Jeep COMMANDER 2006-2010 5.7L HEMI V8

Jeep GRAND CHEROKEE WJ 1999-2004 4.7L V8

Jeep GRAND CHEROKEE WK 2005-2010 4.7L V8 / 5.7L HEMI V8

Jeep GRAND CHEROKEE WK2 2011-2013 5.7L HEMI V8

Jeep CHEROKEE KJ 2002-2005 2.4L

Jeep CHEROKEE KJ 2002-2006 3.7L V6

Jeep CHEROKEE KJ 2005-2006 2.8crd

Jeep WRANGLER TJ 2004 4.0L

Jeep WRANGLER JK 2007-2010 2.8CRD

RAM1500 2012 3.7L V6

RAM1500 2011-2012 4.7L V8

RAM1500 2011-2013 5.7L HEMI V8

RAM2500 2011-2013 5.7L HEMI V8

RAM3500 2012 6.7L CUMMINS

RAM3500 2011-2013 5.7L HEMI V8

RAM DAKOTA 2011 4.7L V8


!!!!!! FILTER SEAL (O-RING) CAUTION !!!!!


The primary oil filter seal MUST be fully installed flush against the oil pump body.

DO NOT install the seal onto the filter neck, and attempt to install the filter and seal

as an assembly. Damage to the transmission will result. Install the new primary oil

filter seal in the oil pump inlet bore. Seat the seal in the bore with the butt end

of a hammer, or other suitable tool. Place replacement filter in position on valve body

and into the oil pump. Install screw to hold filter to valve body.

Tighten screw to 40 in. lbs. torque.



GENERAL INFORMATION: 

1. All other destinations ie. islands or rural/isolated areas may be a subject of courier surcharges or different tariffs at all. 
     You can find the full list of countries and prices at the "Postage" section of each item.

2. Delivery / Courier delays - We do NOT accept any liability / responsibility for delayed deliveries by the couriers. We try our best to get the goods to the customer on time, but please note that delivery time specified on our listings are only estimate, and may vary under certain circumstance, for example festive seasons like Xmas, Easter, bad weather conditions etc. 

3. All components should be fitted with the professional manner by a professional garage and authorised person, and every component should be inspected before the installation, in case of noticeable defect it should be immediately reported, and under any circumstances the component should not be fitted until replaced.

4. All parts are covered with 1 year warranty, or - in case of the service parts (ie. filters) 6000 miles. Special warranty conditions may apply to some of the SRT-8 and SRT-10 models, and also some other post 2018 build engines where 0W/40 or 0W/20 engine oil is used. See oil manufacturer label for more information.
 Product warranty does not cover failure due to misapplication, misuse, abuse, neglect, improper service practices or modifications, and may be void if the purchased from us installed component was used for:
* any type of racing or competition; 
* any off-road use, custom or modified applications; 
* any off-road or dual sport motorcycle/ ATV use
* any illegal highway use, marine, or industrial applications.

5. All information about fitment provided in our item descriptions are correct as per actual vehicle catalogue model year, not as indicated by the vehicle reg. numbers.
Please also note that eBay vehicle compatibility list is a third party software application, which - although constantly updated and improved - may not be 100% accurate, ie. may display a different - than actual - model years of some vehicles or, specific only to certain market area engine versions, which doesn't include your version, or may not display your vehicle model at all, due to some other, locally imposed trade restrictions. We - therefore - strongly recommend to read our item description, and in case of any questions do not hesitate to email us, or to call us directly. See "Business seller information" (located at the bottom of each listing) for our contact details.y vehicle compatibility list as it is very inaccurate. Read our item description, and in case of any questions please do not hesitate to email us or to call us directly.
Please also note that eBay vehicle compatibility list is a third party software application, which - although constantly updated and improved - may not be 100% accurate, ie. may display a different - than actual - model years of some vehicles or, specific only to certain market area engine versions, which doesn't include your version, or may not display your vehicle model at all, due to some other, locally imposed trade restrictions. We - therefore - strongly recommend to read our item description, and in case of any questions do not hesitate to email us, or to call us directly. See "Business seller information" (located at the bottom of each listing) for our contact details.y vehicle compatibility list as it is very inaccurate. Read our item description, and in case of any questions pleas
For Transmission Type Automatic
Brand Mopar / WIX
Manufacturer Part Number MS-9602 / FT1223
Country/Region of Manufacture United States
EAN 765809588431


Original description:




AUTOMATIC TRANSMISSION SERVIVCE KIT (4WD ONLY)


- ATF+4 MOPAR MS-9602 7L (APPROX. 6.6L REQUIRED)

- TRANSMISSION FLUID PRIMARY FILTER (FLAT TYPE) w/O-RING 

- TRANSMISSION COOLER FILTER (CANISTER TYPE) 

- TRANSMISSION PAN/SUMP GASKET


TRANSMISSIONS: 

45RFE/ 545RFE/ 65RFE/ 66RFE 

(4-WHEEL DRIVE MODELS ONLY):


CHRYSLER ASPEN 2007-2009 4.7L V8/ 5.7L HEMI V8

DODGE DAKOTA 2000-2002  2.5L

DODGE DAKOTA 2004-2005 AND 2009  3.7L V6

DODGE DAKOTA 2000-2003  3.9L V6 / 5.9L V8

DODGE DAKOTA 2000-2010 4.7L V8

DODGE DURANGO 2004-2005 AND 2009  3.7L V6

DODGE DURANGO 2000-2009 4.7L V8

DODGE DURANGO 2000 5.2L V8

DODGE DURANGO 2004-2009 5.7L HEMI V8

DODGE DURANGO 2002-2003 5.9L V8

DODGE RAM1500 2002-2010 3.7L V6

DODGE RAM1500 2006-2006 and 2008-2010 4.7L V8 / 5.7L HEMI V8

DODGE RAM2500 2003-2009 5.9L CUMMINS

DODGE RAM2500 2007-2010 6.7L CUMMINS

DODGE RAM2500 2003 8.0L V10

DODGE RAM2500 2003-2006 and 2008-2010 5.7L HEMI V8

DODGE RAM3500 2003-2007 5.9L CUMMINS

DODGE RAM3500 2007-2010 6.7L CUMMINS

DODGE RAM3500 2003 8.0L V10

DODGE RAM3500 2003-2006 and 2008-2009 5.7L HEMI V8

JEEP COMMANDER 2006-2008 3.7L V6

JEEP COMMANDER 2006-2009 4.7L V8

JEEP COMMANDER 2006-2010 5.7L HEMI V8

JEEP GRAND CHEROKEE WJ 1999-2004  4.7L V8

JEEP GRAND CHEROKEE WK 2005-2010  4.7L V8 / 5.7L HEMI V8

JEEP GRAND CHEROKEE WK2 2011-2013  5.7L HEMI V8

JEEP CHEROKEE KJ 2002-2005 2.4L

JEEP CHEROKEE KJ 2002-2006 3.7L V6

JEEP CHEROKEE KJ 2005-2006 2.8crd

JEEP WRANGLER TJ 2004 4.0L

JEEP WRANGLER JK 2007-2010 2.8CRD

RAM1500 2012  3.7L V6

RAM1500 2011-2012 4.7L V8

RAM1500 2011-2013 5.7L HEMI V8

RAM2500 2011-2013 5.7L HEMI V8

RAM3500 2012 6.7L CUMMINS

RAM3500 2011-2013 5.7L HEMI V8

RAM DAKOTA 2011 4.7L V8


!!!!!!   FILTER SEAL (O-RING) CAUTION !!!!!


The primary oil filter seal MUST be fully installed flush against the oil pump body.

DO NOT install the seal onto the filter neck, and attempt to install the filter and seal

as an assembly. Damage to the transmission will result. Install the new primary oil

filter seal in the oil pump inlet bore. Seat the seal in the bore with the butt end

of a hammer, or other suitable tool. Place replacement filter in position on valve body

and into the oil pump. Install screw to hold filter to valve body.

Tighten screw to 40 in. lbs. torque.



GENERAL INFORMATION: 

1. Shipping charges are free for the UK mainland only. All other destinations ie. islands or rural/isolated areas may be a subject of courier surcharges or different tariffs at all. 
    INTERNATIONAL SHIPPING:  We could only ship internationally to the selected destinations, where Ebay Global Shipping Programme operates. You can find the full list of countries and prices at the "Postage" section of each item.

2. Delivery / Courier delays - We do NOT accept any liability / responsibility for delayed deliveries by the couriers. We try our best to get the goods to the customer on time, but  please note that delivery time specified on our listings are only estimate, and may vary under certain circumstance, for example festive seasons like Xmas, Easter, bad weather conditions etc. 

3. All components should be fitted with the professional manner by a professional garage and authorised person, and every component should be inspected before the installation, in case of noticeable defect it should be immediately reported, and under any circumstances the component should not be fitted until replaced.

4. All  parts are covered with 1 year warranty, or - in case of the service parts (ie. filters) 6000 miles. Special warranty conditions may apply to some of the SRT-8 and SRT-10 models, and also some other post 2018 build engines where 0W/40 or 0W/20 engine oil is used. See oil manufacturer label for more information.
 Product warranty does not cover failure due to misapplication, misuse, abuse, neglect, improper service practices or modifications, and may be void if the purchased from us installed component was used for:
* any type of racing or competition; 
* any off-road use, custom or modified applications; 
* any off-road or dual sport motorcycle/ ATV use
* any illegal highway use, marine, or industrial applications.

5. All information about fitment provided in our item descriptions are correct as per actual vehicle catalogue model year, not as indicated by the vehicle reg. numbers.
Please also note that eBay vehicle compatibility list is a third party software application, which - although constantly updated and improved - may not be 100% accurate, ie. may display a different  - than actual - model years of some vehicles or, specific only to certain market area engine versions, which doesn't include your version, or may not display your vehicle model at all, due to some other, locally imposed trade restrictions. We - therefore -  strongly recommend to read our item description, and in case of any questions do not hesitate to email us, or to call us directly. See "Business seller information" (located at the bottom of each listing) for our contact details.y vehicle compatibility list as it is very inaccurate. Read our item description, and in case of any questions please do not hesitate to email us or to call us directly.

Increase your Sales Abroad with WebInterpret's Global Listing Solution.