Type: XP600 tenth generation 6-color replacement print head Material: ABS+metal Colour: Black Style: Ordinary/Gluing(Optional) Printing color: 6 color printing Size: about 85*57*43cm/33.46*22.44*16.93 inch Weight: about 100 grams Applicable models: for Epson XP Series for Epson XP510 XP600 XP601 XP605 XP610 XP615 XP620 XP625 XP630 XP635 XP700 XP701 XP720 XP721 XP750 XP800 XP801 XP810 XP850 XP950 Tips: Gluing type: The product is sold with waterproof glue on both sides by default. After the product is sold, it is a man-made problem (such as: burning the nozzle, using a syringe to punch holes) will not be returned or exchanged. Before replacing the new print head, it is strongly recommended to replace the ink sac, ink pad, and cable with new ones. If the test strip printed after installation is not replaced and there is a lack of needles, these problems do not belong to the quality of the print head itself. If there is a serious shortage of needles, users who know a little know that it is caused by the leakage of the ink sac, the ink pad or the lack of ink absorption. Suggestion: Before buying a sprinkler, be sure to do the following: 1. If the machine reports an error (that is, the red light flashes when the machine is turned on), it is not necessarily because the nozzle is broken, but there may be a problem with the frame or the main board. In this case, please solve the error problem before buying the nozzle. 2. Both the main board and the print head are burnt out, first replace the main board, and then check the print head! 3. Check whether the data cable is split, corroded or burnt out. If the data cable is broken or not inserted properly, it will burn the nozzle and the motherboard. Please be sure to check the data cable! 4. For customers whose machine is too old, such as a lot of ink inside, the machine is very dirty, it is recommended not to change the nozzle, it is best to replace the machine directly! So as not to buy a nozzle and then put it on and say that the effect is not good 5. It is recommended that you determine whether your ink cartridges or inks or continuous ink-supply system are of good quality. For the continuous ink-supply system that has been used for a long time, the continuous ink-supply system that is very dirty, and the continuous ink-supply system that has a lot of dust and ink sprinkled everywhere, it is recommended to replace it. Set of new good quality continuous ink-supply system. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.
Printer Replacement Nozzle Print Head Printhead for Epson XP600 XP625 XP630 XP700 XP720 XP800 XP810 XP850 XP950 UV Printers Accessories
Kind tips:
1. It is normal to have ink traces on the print head, because we need to install the print head on the printer for testing before delivery, and we will send the product after confirming that the product functions normally.
2. If you find signs of scratches after receiving the product, please gently wipe the print head with a paper towel or towel, because it is a protective liquid and dust that may exist in the box. After wiping, you can install it on the printer. Printer, check if it can be used
Dear customer, if you mind these problems, please do not buy this product
Feature:
1.ABS and Metal: This product is made of ABS and metal material, which is rust-proof, durable and has excellent impact resistance.2.High performance: After the replacement of the nozzle, the printing is smooth and not blocked, the printing is clear and neat, and the pattern and text are colorful.
3.Protective cover: Equipped with a protective cover to effectively prevent dust from contaminating the inner cartridge and protect accessories from damage.
4.Stable Printing: This print head can provide a stable printing process, which not only guarantees the printing volume, but also the quality even for long-term use.
5.Easy to install: Special design, easy to install on the printer, no complicated installation tools, simple and convenient.
6.Applicable Models: This is the perfect replacement printhead for Epson XP Series, widely used in schools, offices, government, banks, etc.
Specification:
Type: XP600 tenth generation 6-color replacement print head
Material: ABS+metal
Colour: Black
Style: Ordinary/Gluing(Optional)
Printing color: 6 color printingSize: about 85*57*43cm/33.46*22.44*16.93 inch
Weight: about 100 grams
Applicable models: for Epson XP Series for Epson XP510 XP600 XP601 XP605 XP610 XP615 XP620 XP625 XP630 XP635 XP700 XP701 XP720 XP721 XP750 XP800 XP801 XP810 XP850 XP950
Tips:
Gluing type: The product is sold with waterproof glue on both sides by default. After the product is sold, it is a man-made problem (such as: burning the nozzle, using a syringe to punch holes) will not be returned or exchanged.
Before replacing the new print head, it is strongly recommended to replace the ink sac, ink pad, and cable with new ones. If the test strip printed after installation is not replaced and there is a lack of needles, these problems do not belong to the quality of the print head itself. If there is a serious shortage of needles, users who know a little know that it is caused by the leakage of the ink sac, the ink pad or the lack of ink absorption.
Suggestion:
Before buying a sprinkler, be sure to do the following:
1. If the machine reports an error (that is, the red light flashes when the machine is turned on), it is not necessarily because the nozzle is broken, but there may be a problem with the frame or the main board. In this case, please solve the error problem before buying the nozzle.
2. Both the main board and the print head are burnt out, first replace the main board, and then check the print head!
3. Check whether the data cable is split, corroded or burnt out. If the data cable is broken or not inserted properly, it will burn the nozzle and the motherboard. Please be sure to check the data cable!
4. For customers whose machine is too old, such as a lot of ink inside, the machine is very dirty, it is recommended not to change the nozzle, it is best to replace the machine directly! So as not to buy a nozzle and then put it on and say that the effect is not good
5. It is recommended that you determine whether your ink cartridges or inks or continuous ink-supply system are of good quality. For the continuous ink-supply system that has been used for a long time, the continuous ink-supply system that is very dirty, and the continuous ink-supply system that has a lot of dust and ink sprinkled everywhere, it is recommended to replace it. Set of new good quality continuous ink-supply system.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
- * Payment must be received within 7 business days of auction closing.
- * If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
- * Refunds are normally issued with 2 working days.If you need any further information regarding payments,please contact us via eBay message.
- * If you have any special requests, please send us a message before making the payment.
- *NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.
-
* 12 months Warranty. Buy with confidence!
-
* If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it.
-
* If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
-
* If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.
-
* We ship from the item location.
- * Items will be shipped within 2-3 business day(S) after payment completed received.
- * NOTE: Please check the parcel before sign for it, If any problem with the parcel please mark on the signature that "Damaged when received" when signing it. Thank you.
-
* We are not responsible for any custom duty or import tax.
-
* We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it.
-
* All messages will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible.
-
* Serious Buyer Only! Please place bid only if you agree with all the terms.
-
* If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback. We believe we can produce a positive outcome to any situation and will work hard to earn your praise.
-
* If you were pleased with this transaction, Please give us 5 star rating, thanks!
-
* Our office hours are 9:00 a.m to 6:00 p.m (GMT +8) of Monday to Saturday.
-
* And our Office is closed on Sunday and public holidays.
-
* We apologize for the late reply during the holidays.