1HZ-150KHZ PWM Pulse Frequency Duty Cycle Adjustable Module Signal Generator
Description:
brand new and
Signal generator is a device that provides electrical signals at a variety of frequencies, square and output levels.It is used as a signal source or excitation source for testing.Widely used in production practice and technology.

Features:
With outer casing
LCD high definition display
Support UART
Support frequency adjustment
Support duty cycle adjustment
High precision detection
Support power-down memory function
1-Channel PWM output

Frequency set range:
Enter the settings interface when short press any button FREQ+ or FREQ- in the normal running status to select frequency range.Automatically switch frequency range.
Pay attention to the position where the decimal point moves when the button is pressed.
Display XXX.No decimal point,The minimum frequency is 1Hz.The frequency range is 1Hz ~ 999Hz.
Display X.XX.The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz.
Display XX.X.The decimal point is the third last,The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz.
Display X.X.X.The decimal point is fully lit,The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz.

For example:
Display 100 means PWM output frequency is 100Hz;
Display 1.01 means PWM output frequency is 1.01KHz;
Display 54.1 means PWM output frequency is 54.1KHz;
Display 1.2.4 means PWM output frequency is 124KHz;

Duty cycle set range:
Enter the settings interface when short press any button DUTY+ or DUTY- in the normal running status to select duty cycle.Automatically switch frequency range.
Duty cycle range is 0.00%-.

Use steps:
Connect to power supply;
Short or long press button FREQ+ or FREQ- to set frequency;
Short or long press button DUTY+ or DUTY- to set duty cycle
Connect to load.

UART communication and parameter settings:
The system supports UART data upload and parameter setting functions (TTL level);
UART: 9600, 8, 1
1.Set PWM frequency:
F101 :Set frequency is 101Hz.101 can by replace by 001~999;
F1.05 :Set frequency is 1.05KHz.1.05 can by replace by 1.00~9.99;
F10.5:Set frequency is 10.5KHz.10.5 can by replace by 10.0~99.9;
F1.0.5 :Set frequency is 105KHz.1.0.5 can by replace by 1.0.0~1.5.0;
2.Set PWM duty cycle:
DXXX :Set duty cycle is XXX. XXX can be 000-100.
E.g:D051 means PWN duty cycle is be set as 51%.
3.Read set parameter:
Send read and then get parameter.
4.Return value:
Return DOWN :Set success.
Return FALL :Set fail.

Application:
1.Square signal generator, generating square signal for experimental development;
2.Used to generate a square signal that controls the motor driver;
3.Generate adjustable pulses for use by the MCU;
4.Dimmer;
5.Speed governor;

Notice:
It's 1-channel PWM output signals are the same.They can not adjust independently.

Specification:
Product name: PWM Signal Generator
Work
Frequency range:1Hz~150KHz
Frequency accuracy:2%
Duty cycle range:0.00%-
Output Current:About 5-30mA
Output amplitude:Same to input voltage
Operating temperature:-20℃~70℃
Material: Plastic
Color: Black
Size:app. 78 x 26 x 42mm / 3.07 x 1.02 x 1.65in
Quantity: 1 pc

Note:
Transition: 1cm=10mm=0.39inch
No retail package.
Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x PWM Signal Generator(other accessories demo in the picture is not included.)