AC-DC 220V to 5V 3.3V 12V 24V 5W 5V700mA Power Supply Module AC DC Step Down Buck Module HLK-5M03 HLK-5M05 HLK-5M12 HLK-5M24
Features:
1. Ultra-thin, ultra-small, the smallest volume in the industry
2. Universal input voltage (90~245Vac)
3. Low power consumption, green environmental protection, no-load loss <0.1W
4. Low ripple, low noise
5. Good output short circuit and over current protection and self-recovery
6. High efficiency, high power density
7. Input and output isolation withstand voltage 3000Vac
8. 100% full load aging and testing
9. High reliability, long life design, continuous working time greater than 100,000 hours
10. Meet UL and CE requirements; product design meets EMC and safety test requirements
11. High quality environmental protection waterproof and thermal conductive glue potting, moisture proof, anti-vibration, meet the waterproof and dustproof IP65 standard
12. Economical solution, cost-effective
13. No external circuit is required to work
Product features:
1. Meet UL, CE requrements
2. Ultra-thin ultra-small
2. All voltage input(AC: 90-264V)
3. Low nipple and low noise
4. Output overload and short circuit protection
5. High efficiency, high power density
6. The product is designed to meet the requrements of EmC and Safety Test
7. Low power consumption, environmental protection, no-load loss 0.1W
8. 100% load aging and testing
Environment Condition
Operation Temperature:-20 to +60℃
Store Temperature:-40 to +80℃
Relative humidity:5-95%
Cooling way:Cooling by radiation
Atmospheric pressure:80-106 Kpa
Sea level elevation:<2000m
Vibration:Vibration coefficient
-500Hz, 2G10min/Icycle, 60minead
along X.Y.z
3. Electrical Characteristic
1. Input characteristics (test at room temperature 20 C)
Rated input voltage:100-240VAc
Input voltage range:90-264VAc
Maximum input current:≤2A
Input current surge:≤10A
maximum input voltage:≤270VAc
Enter slow start:≤50mS
Input Low Voltage Efficiency:Vin=110VAc, Output full-load_69%
Input High Voltage Efficiency:Vin=220VAc, output full-load270%
Long- term reliability:MTBF>100,000
Load rated output voltage:+5±0.1VDc
Full rated output voltage:+5±0.2VDc
Short-term maximum output:≥1000mA
The maximum output for a long time:600mA
Voltage regulation:±0.2%
Load Regulation:±0.5%
Output ripple and noise:Rated input voltage,full load.Using 20MHz of bandwidth
the load side 10uF and o1uF capacitor to be tested
Switch overshoot amplitude:Rated input voltage and output load plus 10%)≤5%Vo
Output over-current protection:≤50mV
150-200% of the output maximum load
Output short circuit protection:Direct short circuit at the normal output, automatically resume normal
peration after a short circuit removal
4. Safety Characteristics
4. 1 Products designed to meet UL, CE safety certification requirements
4.2 Safety and electromagnetic compatibility
Designed with the input of 0.5A UL certified insurance
PCB board using double-sided copper clad plate production, material for the 94-vO fire rating level
Safety standards: Compliance with UL1012, EN60950, UL60950
Insulation voltage: I/P-O/P: 2500VAC
Insulation resistance: I/PO/P> 100M Ohms/500VDC 25 C 70% RH
comply with EN55011, EN55022(CISPR22)
Electrostatic discharge IEC/EN 61000-4-2 level 4 8]v/15kV
RF radiation Immunity: IEC /EN 61000-4-3 See Application Note
4.3 Temperature safety design
At room temperature, the capacitors of this power, the inner surface of the main converter maximum
Shell maximum surface temperature does not exceed 60 C
Description:
The power supply is isolated industrial power module, with temperature protection, over-current protection and short circuit protection, high and low voltage isolation, AC85 ~ 265V wide voltage input, AC and DC, 431 precision DC5V output, compact, stable performance , Cost-effective features.
Parameter:
1. Input voltage: AC 85 ~ 265v 50 / 60HZ or DC100v-370v
2. Output voltage: DC5V (± 0.2V)
3. Output Current: 700mA
4. Power: 3.5W
