Carbon Kevlar Cloth 165g, I-Weave 3k 1000mm Width, Comes on a roll
SPECIFICATION
Weight and Dimensions
| Width | 1000 | mm |
|---|---|---|
| Thickness | 0.3 | mm |
| Consolidated Thickness | 0.3 | mm |
| Areal Weight | 165 | g/m² |
Fabric Specification
| Fibre Orientation | 0, 90 | |
|---|---|---|
| Colour | Black/Yellow | |
| Format | Woven Fabric | |
| Filament Count | 3k | |
| Fibre Type | Carbon Fibre Hybrid | |
| Weave | I-Weave | |
| Ends | 6.5 | /cm |
| Picks | 6.5 | cm |
| UV Resistance | Poor | |
| Brand | Dupont | |
| Fibre Specifics | Pyrofil TR30S 3k, Kevlar 49 |
Compatible With
| Compatible With | Epoxy | Yes |
|---|---|---|
| Compatible With | Polyester | Yes |
| Compatible With | Vinylester | Yes |
General Properties
| Gross Weight | 0.188 | kg |
|---|
Top quality carbon/Kevlar® fabric cloth woven from high-strength TR30S 3k carbon and genuine Kevlar® yarn.
This 188gsm carbon/aramid hybrid reinforcement uses a distinct plain weave pattern and is used to add strength, stiffness.Carbon provides high levels of stiffness and strength, whereas Aramid provides huge impact/abrasion/fracture resistance.
This distinct looking hybrid cloth is used in many high-performance, high-impact applications such as canoes, military ballistics and rally-car paneling.Carbon/Kevlar® fabric can be used in just the same way as standard carbon fibre. It is suitable for use in wet-lay, vacuum bagging and resin infusion manufacture as well as for use as a single surface layer where parts are being made to look like carbon/Kevlar® (skinning)
When using only carbon/Kevlar® reinforcement in a part you should expect to use several layers of this fabric in each part. None-structural components like body panels and covers will typically require 3-6 layers of a carbon fibre cloth of this weight.
When purchasing multiple metres the fabric will be supplied in one continuous length on a roll.