Product Description
Feature
2pcs CSP LED chips with new technology.
Uniform light distribution, powerful LEDs and super brightness with 360° light beam.
High brightness, low energy consumption, 180% more brightness than original lights.
Built-in exclusive intelligent constant current
Strong anti-interference performance.
Small illuminated areas, super bright high-performance chips and a super capacitor ensure more even and concentrated lighting.
Optimized cooling: Cold-pressed aluminum accelerates the cooling rate to 30% and ensures a long service life.
A mass of clear white light with high penetration in the rain, foggy, dusty days.
Plug and play, easy to install.
Package included
2 x LED Light bulbs
Fitment:
For Chevrolet Lacetti 2005-2013
For Chevrolet Trailblazer 2001-2008
For Daewoo Lacetti Hatchback 2002-2005
For Hyundai Accent III 2005-2010
For Hyundai i30 (FD) / i30 Estate (FD) 2007-2012
For Hyundai ix20 (JC) 2010-2019
For Hyundai ix35 (LM, EL, ELH) up to 2013
For KIA Sportage III (SL) 2010-2019
For Ssangyong Rodius I 2005-2019
For Ssangyong Stavic 2005-2019
NOTE:
This item wasn't exist self-decoding/self-Canbus【anti-flashing /anti-warning】function and DRL【Daytime running light】 function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1. the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2. the on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3. The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)
Feasible Solution:
1. Install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2. Install the resistor, you need professional installation.
3. Using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect.
Please mind to check whether the installation space is sufficient.
Some parts need to be removed before install this item to make enough installation space for it.
It may be necessary to replaced the customize dust cover of your headlamp.
Install caution
1. For safety reasons, make sure that the car has cooled down sufficiently before starting installation.
2. Park the vehicle in the park or make sure that the gear is safely engaged.
3. Make sure the ignition is off and the keys are removed.
4. Avoid burns, especially when turning the vehicle lights on and off.
5. Be careful not to crush or cut the lamps and do not touch them with your fingers as this can cause stains.
6. Carefully check the connection of the contact points, connections and wires, as faulty connections can lead to lighting problems.
7. When adjusting the light bulb, make sure that the end of the light bulb does not come into contact with the interior light protection of the headlight.