Note: water-cooled head are mass production, not crafts, the appearance of very strict requirements of customers please consult before buying, thank you!
Water-cooled head is also known as heat exchanger, not divided into which is the water inlet and which is the water outlet. Each water-cooled head in the factory are after 3KG static water pressure test without leakage, please note that the hydraulic pressure shall not exceed 3KG, such as more than any problem, will not be responsible!
Copper water-cooling head thickness 10mm! !
Silver water-cooled head introduction.
1, use: semiconductor refrigeration chip exclusive water-cooled head, liquid-cooled water plate, water-cooled exchanger, positive and negative are flat right angle, and refrigeration chip is perfectly matched, tailored to the semiconductor refrigeration chip, can be done to dissipate heat, cold transfer, cold water formation and other production.
2、Material:Aluminium,integrated welding
3, Pagoda nozzle: 9.5mm external diameter (can be connected to the inner diameter of 7 ~ 8mm soft water pipe), length 15mm (hand-measured)
4、Smooth throwing surface, zero distance contact with the chip, better heat absorption effect.
5、Size: width are 40mm, thickness are 12mm, length are 40mm, 80mm, 120mm, 160mm, 180mm, 200mm, 240mm.
Blue water-cooled head introduction.
1, the main function: cooling chip water-cooling head, flat water-cooling board, CPU water-cooling radiator, DIY water-cooling module
2、Material:Aluminium,welded in one piece,blue anodized.
3, Pagoda nozzle: OD 9.5mm (can be connected to the inner diameter of 7~8mm soft water pipe), length 15mm (manual measurement)
4、Smooth throwing surface, zero distance contact with the chip, internal fins are dense, better heat transfer 5、Product size: width are 40mm, thickness are 12mm, length are 40mm.80mm, 120mm, 160mm.
Attention: 1, the installation of water-cooled head requires a certain amount of
1, the installation of water-cooled head requires a certain degree of competence, installation, if you encounter unknown, please contact customer service.
2, water-cooled set of test pressure delivery, but the installation to the computer or other electronic products inside, the first test whether the leakage, to ensure that there is no leakage and then powered, if the leakage, the circuit board needs to be dried with a hairdryer and then powered! Remember!