SIZE OF GRAPHICS - 4630MM X 143MM X2

BEFORE YOU ORDER Please check the size of the graphics you will need by measuring the area you want to cover on your vehicle. Our graphics are available in other sizes so you can buy the size you need. We always allow a small amount extra to account for trimming or placement.

THIS KIT Our sticker kit is made up of Main graphics.  The stripe is supplied "Ready to Fit" and supplied with application/fitting paper with instructions and application tool. Gloss finish. Our stripe is a High performance ImagePerfect 5-7 year vinyl.

COLOUR CHOICE Please note: The stripe is gloss BLACK. If you require any other colour, please let us know in the instructions from our list of colour references.

FITTING INSTRUCTIONS - These instructions are for wet type fitting.

Tools you will need: Spray bottle filled water and a few drops of washing up liquid. Application squeegee. Craft knife.

The surface where the vinyl is to be applied must be completely clean. An alcohol based is a good way to remove any dirt, wax, polish or grease.

Remove the backing paper from the vinyl.

Spray the sticky side of the vinyl and the surface when it is being applied with generous amount of the liquid.

Place the vinyl in position on the surface. The liquid will allow the vinyl to be moved into the right position.

When it is in the correct position use the application tool (Squeegee) and carefully stroke the vinyl from the inner to the outer edge removing the liquid with a reasonable amount of force. Be careful not to scratch the surface of your vehicle. 

Once in place allow 5-10 minutes for the liquid to dry and then you can carefully remove the application/fitting paper to reveal the vinyl.

It will take around 24-48 hours to bond fully.

AFTERCARE - When cleaning your vehicle do not use a power washer on the graphic.