Product Details
Description:
The servo control module is a plug-and-play, easy-to-use servo controller.
Supply three servo control modes: Knob adjustment, back to center function.
It can be used to test servo motor.
Features:
Support manual control;
Support UART control;
Support back to center function;
Support 2pcs servo motors at the same time;
High precision;
MCU STM8S103 Output high precision PWM signal;
Button change work mode;
Support 2S chargeable lithium battery.
Parameters:
Input voltage: DC 5~9V (change according to actual)
Control channel: 2CH
Control precision: 0.09°
Color: Green
Support cycle: 20ms
Support servo motor: Pulse Width 0.5~2.5s
Operating Temperature: -20~70°C
Operating Humidity: 5%-90%RH
Size: 47.2*29.8mm
Wiring Method:
Users can input voltage from green terminal or white XH2.54mm female socket.
It just need connect to power supply and motor if users no need control servo motor by PC or MCU.
It need connect to PC or MCU if control servo by PC or MCU. We can provide a soft for PC, but users need write code by yourself and we can not provide test code, because the controllers used by each person are different. Request your understanding!
Step 1: Connect input power supply at input terminal;
Step 2: Connect servo motor at 2*3Pin black male pins;
VCC: It connects to positive pole at servo motor;
GND: It connects to negative pole at servo motor;
S: It connects to input signal at servo motor.
Manual Control:
Select to Manual Control by button 'S' when LED indicator D1 is turn ON and D2 will OFF;
Manual Control include Knob Control and UART Control. The default is Knob Control. Automatic switching between two control modes.
In other words, select the knob mode when checking that the potentiometer is rotating. Select UART mode when the UART receives a valid signal.
1) Knob Control:
Directly rotate the potentiometer, the servo motor will change angle with rotation.
Rotation angle range 0~180°.
Two servo motor will make the same action if connect to two servo motor.
2)UART Control:
It can get UART command signal from PC soft or MCU.Baud rate is 9600 and compatible 3.3V/5V TTL level signal.It can control 2pcs servo motors separately.
Command format and description: #<ch>P<time>!
2.1) #: Starting symbol, indispensable;
2.2) <ch>: Servo motor number.Range is 00 or 01;
2.3) P: Fixed symbol, indispensable;
2.4) <time>: PWM width.Rang is 0500~2500 corresponding to 0~180°;
2.5) !: Fixed symbol, indispensable.
For example:
Send #00P1500! means servo motor M0 turn to position at 90°.
Send #01P1000! means servo motor M1 turn to position at 45°.
Users can also not send commands but just operate on control soft.
Back to Center function:
Select to Back to Center Control by button 'S' when LED indicator D2 is turn ON and D1 will OFF.
Servo motor M0 and M1 will turn to center when select this mode.
Note:
1. Please provide enough power, otherwise the module or servo motor may not work properly.
2. Situation by power shortage:LED indicator blinks;Servo motor is not controlled.It need add input current in these situation.
3. The control software LCSC supports Chinese and English. After installation, the Chinese language is displayed by default. Users can choose to display English as shown in description picture.
Application:
Smart robot
Aircraft
Toy production
Education
Technology display
Package Included:
2pcs 2 Channel Servo Motor Controller
The servo control module is a plug-and-play, easy-to-use servo controller.
Supply three servo control modes: Knob adjustment, back to center function.
It can be used to test servo motor.
Features:
Support manual control;
Support UART control;
Support back to center function;
Support 2pcs servo motors at the same time;
High precision;
MCU STM8S103 Output high precision PWM signal;
Button change work mode;
Support 2S chargeable lithium battery.
Parameters:
Input voltage: DC 5~9V (change according to actual)
Control channel: 2CH
Control precision: 0.09°
Color: Green
Support cycle: 20ms
Support servo motor: Pulse Width 0.5~2.5s
Operating Temperature: -20~70°C
Operating Humidity: 5%-90%RH
Size: 47.2*29.8mm
Wiring Method:
Users can input voltage from green terminal or white XH2.54mm female socket.
It just need connect to power supply and motor if users no need control servo motor by PC or MCU.
It need connect to PC or MCU if control servo by PC or MCU. We can provide a soft for PC, but users need write code by yourself and we can not provide test code, because the controllers used by each person are different. Request your understanding!
Step 1: Connect input power supply at input terminal;
Step 2: Connect servo motor at 2*3Pin black male pins;
VCC: It connects to positive pole at servo motor;
GND: It connects to negative pole at servo motor;
S: It connects to input signal at servo motor.
Manual Control:
Select to Manual Control by button 'S' when LED indicator D1 is turn ON and D2 will OFF;
Manual Control include Knob Control and UART Control. The default is Knob Control. Automatic switching between two control modes.
In other words, select the knob mode when checking that the potentiometer is rotating. Select UART mode when the UART receives a valid signal.
1) Knob Control:
Directly rotate the potentiometer, the servo motor will change angle with rotation.
Rotation angle range 0~180°.
Two servo motor will make the same action if connect to two servo motor.
2)UART Control:
It can get UART command signal from PC soft or MCU.Baud rate is 9600 and compatible 3.3V/5V TTL level signal.It can control 2pcs servo motors separately.
Command format and description: #<ch>P<time>!
2.1) #: Starting symbol, indispensable;
2.2) <ch>: Servo motor number.Range is 00 or 01;
2.3) P: Fixed symbol, indispensable;
2.4) <time>: PWM width.Rang is 0500~2500 corresponding to 0~180°;
2.5) !: Fixed symbol, indispensable.
For example:
Send #00P1500! means servo motor M0 turn to position at 90°.
Send #01P1000! means servo motor M1 turn to position at 45°.
Users can also not send commands but just operate on control soft.
Back to Center function:
Select to Back to Center Control by button 'S' when LED indicator D2 is turn ON and D1 will OFF.
Servo motor M0 and M1 will turn to center when select this mode.
Note:
1. Please provide enough power, otherwise the module or servo motor may not work properly.
2. Situation by power shortage:LED indicator blinks;Servo motor is not controlled.It need add input current in these situation.
3. The control software LCSC supports Chinese and English. After installation, the Chinese language is displayed by default. Users can choose to display English as shown in description picture.
Application:
Smart robot
Aircraft
Toy production
Education
Technology display
Package Included:
2pcs 2 Channel Servo Motor Controller
- EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.