The size of the Flanged Tank Connector is determined by the internal Diameter (ID) of the joining socket.
Flange Tank Connectors are quick and easy to use, making them
perfect for any job, great for inlet/outlet ports between chambers.
The Flange Tank
Connector has been designed like a socket/joining bush, allowing for the ridged
pipe/fittings to be solvent welded in either side of the connector. This is
perfect if you wanted to join onto the inside/outside of a tank/filter system. (please
view our pipe identification chart for finding your correct pipe size)
The Flange Tank
Connector socket is solvent weld; always use a non-toxic sealant when fitting
this product.
Apply Sealant to the
Flange body and the ridged sealing ring to offer a superb watertight seal when
being assembled.
Supplied – flange tank
connector body, rigid sealing ring, and stainless steel screws (quantity will
vary depending on the size of the flanged tank connect)
Sizes Available...
25mm Flanged Tank
Connector
32mm Flanged Tank
Connector
40mm Flanged Tank
Connector
43mm Flanged Tank
Connector (1.5" Waste) (40mm Domestic)
48.3mm Flanged Tank
Connector (1.5" Grey Pressure)
50mm Flanged Tank
Connector
56mm Flanged Tank
Connector (2" Waste) (50mm Domestic)
60.3mm Flanged Tank
Connector (2" Grey Pressure)
63mm Flanged Tank
Connector
75mm Flanged Tank
Connector
82mm Flanged Tank
Connector (3" Waste)
88.9mm Flanged Tank
Connector (3" Grey Pressure)
90mm Flanged Tank
Connector
110mm Flanged Tank
Connector (4" Waste)
Radial 110mm Flanged
Tank Connector (4" Waste)
114.3mm Flanged Tank
Connector (4" Grey Pressure)
Please view the Flanged Tank Connector chart for more information on the dimensions
Tank/Liner Thickness
The flange tank connector is supplied with
self-tapping stainless steel screw, the self-tapping screw can be used with a
tank/liner thickness of up to 5mm. however if the Tank/Liner you want to join
the flange tank connector to, is thicker. We have the solution.
The Flange Extension Kit consists of 6
stainless steel bolts, locking nuts, and 12 stainless steel washers. The
different kits will enable the flange tank connector to be used with
tanks/liners from 0-20mm in thickness.
The Flange Extension Kits come in 4 sizes
(lengths)
25mm Kit – for application with thicknesses
of 0mm-5mm
30mm Kit – for application with thicknesses
of 5mm-10mm
35mm Kit – for application with thicknesses
of 10mm-15mm
40mm Kit – for application with thicknesses
of 15mm-20mm
The flange extension kits are simple and
easy to use; simply assemble the flanged tank connector in the same way. But
replacing the self-tapping screws with the bolts and washers and tightening
down from the back of the flanged tank connects with the locking nuts supplied.
Please Note: 1 x Flange Extension Kit will convert 1 x
Flanged Tank Connector
Supplied – 12 x Stainless steel Washers, 6
x Stainless Steel Bolts, 6 x stainless steel Locking Nuts.