Full Range Of Solvent
Weld & Threaded Multi Stepped Hosetails, Flexible Hose Joiners , Hosetails
From Rigid Pipe Connectors & Hosetails & Backnuts
Stepped
Hosetails
Stepped hosetails have numerous different uses when it
comes to converting flexible hoses to rigid pipes or other equipment. Hosetail
are simple and easy to use.
When connecting any form of flexible hose to
a hosetail please bear in mind that the internal diameter (ID) of the flexible
hose will have to match one of the steps on the hosetail. We sell a wide range
of hosetails that will connect to most hoses on the market so please ensure you
are using the correct size. Please refer to our stepped hosetail dimensions
chart for further details/sizes.
Solvent weld: Solvent
weld hosetails can be used in conjunction with fittings, ridged pipe, and
equipment, providing the correct size is used. Our solvent weld hosetails can
be joined using the outside diameter (OD) of the joining spigot and the
internal diameter (ID), please refer to our stepped hosetail dimensions chart
for further details/sizes. Always use a non-Toxic adhesive
BSP Thread: Our range
of threaded hosetails are manufactured to BSP standards, making them compatible
with any other equipment/branded items that have the same thread size. If unsure about the sizing of BSP please refer
to the male and female BSP thread conversion chart for more information.
Threaded hosetails can be used for many
applications with or without a back nut
Threaded hosetails are supplied with a
sealing washer ensuring a watertight seal
Always cut your Hosetail to the correct size
and de-burr the cut for maximum flow
Hosetail
Sizes Available
32mm Solvent
Weld 1 Stepped Hostail (Step Sizes-32mm ID
Flexible Hose)
43mm/1.5"
Solvent Weld 2 Stepped Hostail (Step
Sizes-13,17.5mm ID Flexible Hose)
43mm/1.5"
Solvent Weld 4 Stepped Hosetail (Step
Sizes-20,25,32,38mm ID Flexible Hose)
50mm Solvent
Weld 4 Stepped Hosetail (Step Sizes-30,40,50mm
ID Flexible Hose)
1/2"
BSP Threaded 2 Stepped Hosetail (Step
Sizes-13,20mm ID Flexible Hose)
3/4"
BSP Threaded 1 Stepped Hosetail (Step
Sizes-4mm ID Flexible Hose)
3/4" BSP
Threaded 1 Stepped Hosetail (Step Sizes-6mm ID
Flexible Hose)
3/4"
BSP Threaded 1 Stepped Hosetail (Step Sizes-10mm ID Flexible Hose)
1"
BSP Threaded 1 Stepped Hosetail (Step Sizes-32mm ID Flexible Hose)
1"
BSP Threaded 4 Stepped Hosetail (Step Sizes-20,25,32,38mm ID Flexible Hose)
1.25"
BSP Threaded 4 Stepped Hosetail (Step Sizes-20,25,32,38mm ID Flexible Hose)
1.5"
BSP Threaded 4 Stepped Hosetail (Step Sizes-20,25,32,38mm ID Flexible Hose)
For further information on sizing please view the
dimension charts supplied
Flexi
Hose Joiners
The Flexi Hose Joiner Threaded Coupling has been designed
for joining pieces of flexi hose together. Due to this hose joiner having
stepped hosetails it not only allows you to join various sizes of pipe together
but can also be used for reducing your flexi hose size.
This Joiner is also allows you to disconnect
each hosetails individually without breaking the seal from the flexi hose.
Simply undo the retaining nut and the hosetail will just pull out freely. This
is a great feature and ideal for regular maintains or cleaning to be carried
out but also will save time and money
The flexi hose joiner will be supplied with
two “O” rings. Offering a suburb water tight seal
Hosetail To
Rigid Pipe Connectors
This product has been designed solely to be used when
wanting to either get from rigid solvent weld pipe to flexi hose or vice versa.
The great thing about this product is having
the ability to remove the hosetail from the solvent welded fitting by simply
unthreading the retaining nut. Due to this, it will prevent any damages to your
system/setup because your existing seals will remain intacted. This makes it
easy when installing the product, cleaning and if it is a part of your system that
you regularly break down for maintenance.
Removable
43mm 4 Stepped Hosetail from 1.5″/43mm rigid pipe (40mm Domestic Waste Pipe) - Used in-conjunction with flexible hose with an internal
diameter (ID) of 20mm (3/4″) -25mm (1″) 32mm- (1.25″) 38mm-(1.5″) flexi hose.
Jubilee Hose
Clamps
For the vast majority of applications this sturdy worm
drive hose clip is more than suitable. This product has a band that is
continuously threaded enabling extra flexibility when adjusting the clip to the
correct size. The smooth inside profile of the band and rolled edges give
protection for all types of hoses including soft hoses made from rubber or
silicone.
Features and Benefits
• The most popular type of hose clip from market leaders Jubilee®
• Continuously threaded band for easy adjustment of the clip to suit your needs
• Sleek and smooth inner profile of the band protects hoses whilst securing them
• The same Original Jubilee® clips, manufactured from stainless steel for a
higher resistance to corrosion
Typical Applications
• Ideal for use in the agricultural, automotive, industrial and electrical
industries
Suitable for…
25mm-35mm Jubilee Hose Clamps to be used in conjunction with our 25mmID Heavy Duty
Flexible Pond Hose
35mm-45mm Jubilee Hose Clamps to be used in conjunction with our 32mmID Heavy Duty
Flexible Pond Hose
35mm-50mm Jubilee Hose Clamps to be used in conjunction with our 38mmID Heavy Duty
Flexible Pond Hose
50mm-70mm Jubilee Hose Clamps to be used in conjunction with our 50mmID Heavy Duty
Flexible Pond Hose