Notice for USA and CA market:
1.30A Wifi relay switch for power on / off : max load 3300W for 110V or 6600W for 220V, 70% use recommended for safe(For example , the switch will work perfect if your device is under 2310 watts)
2.This wifi timer switch can work with AC 85V - 250V: People use 110V mostly in USA,So you can connect hot line to the "L" port, and neutral line to the "N" port
3.Do not support device with 2 hot lines : make sure one hot line "In"/"out",one neutral line "In"/"out" only.(If your water heater has 2 hots with 115V for each,then can't use this switch)
4.Main Function: APP control("eWeLink") ; remote control;schedule ;timer ; share control
5.Support DIY smart home system: Lights,water pump, water heater , wall power timer , farm water supply...
6.The switch support 250V single hot line, but can't work with 2 hots device.For example,your water heater has 2 hot line with 115V for each,then can't use this switch
Function:
1.AC85-250V input,1 CH
2.Working model:Jog-lock(Momentary)/ Self-locking/ Interlock/Manual
3.PCBA Size:70mm*50mm*25mm
4.Cover Size:95MM *55MM *32MM
5.Can be paired with 5pcs remote control at the same time
1.How to clean code:
* Press the Paired Button on the board 8 times,light flash,cleaning code successfully.
2.How to set the working model:
* Jog-lock(Momentary):Press "paired button" 4 times
* Self-locking:Press "paired button" twice
* Interlock:Press "paired button" triple times, then press A button ,then B button
3.How to set the wifi model
* Long press the Paired Button on the board,blue light flash,waiting for app.
Standby Power Consumption: <0.5 W
Working environment: Indoor
Working Temperature: -10℃~45 ℃
Humidity: ≤80% RH
Support: Wifi 2.4 GHz 802.11 b/g/n, 2G / 3G / 4G
Wireless Communication Range: 100 m / 328 ft
Material: V0 flame-retardant material
Dimension: 95 x 55 x 30 mm
Net Weight: 88 g