| ISolar MLV 3KW-U |
| AC mode |
| Rated input voltage |
110/120VAC |
| Input voltage range |
(90Vac-140Vac)±2% |
| Frequency |
50Hz/ 60Hz (Auto detection) |
| Frequency Range |
47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz
(60Hz); |
| Overload/short circuit protection |
Circuit breaker |
| Efficiency |
>95% |
| Conversion time (bypass and inverter) |
10ms (typical) |
| AC reverse protection |
Available |
| Maximum bypass overload current |
40A |
| Inverter mode |
| Output voltage waveform |
Pure sine wave |
| Rated output power (VA) |
3000W |
| Rated output power (W) |
3000W |
| Power factor |
1 |
| Rated output voltage (Vac) |
120VAC |
| Output voltage error |
±5% |
| Output frequency range (Hz) |
50Hz ± 0.3Hz/60Hz ± 0.3Hz |
| Efficiency |
>92% |
| Overload protection |
102% < load <110%) ±10%:
report error and turn off the output after 5 minutes;
(110% < load < 125%) ± 10%: report error and turn off the output after 10 seconds;
Load
>125% ±10%: report error and turn offthe output after 5 seconds; |
| Peak power |
4500VA |
| Loaded motor capability |
2HP |
| Output short circuit protection |
Circuit breaker |
| Bypass breaker specifications |
40A |
| Rated battery input voltage |
24V (Minimum starting voltage 22V) |
| Battery voltage range |
20.0Vdc~33Vdc ± 0.6Vdc (Undervoltage
alarm/shutdown voltage/overvoltage alarm overvoltage recovery... settable on LCD screen) |
| Power saving mode |
Load ≤25W |
| AC charging |
| Battery type |
Lead acid or lithium battery |
| Maximum charge current |
60A |
| Charge current error |
± 5Adc |
| Charge voltage range |
18.0Vdc~33Vdc |
| Short circuit protection |
Circuit breaker and blown fuse |
| Circuit breaker specifications |
40A |
| Overcharge protection |
Alarm and turn off charging after 1 minute |
| PV charging |
| Maximum PV open circuit voltage |
100VDC |
| PV operating voltage range |
30-100VDC |
| MPPT voltage range |
30-95VDC |
| Battery voltage range |
18-33VDC |
| Maximum output power |
1600W |
| PV charging current range (can be set) |
0-60A |
| Charging short circuit protection |
Blown fuse |
| Wiring protection |
Reverse polarity protection |
| Certified
specifications |
| Certification |
CE(IEC/EN62109-1,-2),ROHS2.0 |
| EMC certification level |
EN61000 |
| Operating temperature range |
-15°C to 55°C |
| Storage temperature range |
-25°C ~ 60°C |
| Humidity range |
5% to 95% (Conformal coating protection) |
| Noise |
≤60dB |
| Heat dissipation |
Forced air cooling, variable speed of fan |
| Communication interface |
USB/RS485(WiFi/GPRS)/Dry node control |
| Size (L*W*D) |
378mm*280mm*103mm |
| Weight (kg) |
6.2
|