Kawauso Shoten's original vest size 127 black and white film

One RERAPAN400 127 size.

(We also offer discounted 3-piece and 10-piece sets)

Can be used with cameras of 4 x 6.5 cm size, 4 x 4 cm size, etc.

Film type: black and white film

Film sensitivity ISO400/27°

Country of manufacture: Japan

JAN 4573479380011

　

Reference development time

ISO400 Agfa R09 1+50 20℃ 20 minutes

ISO400 KODAK D-76 stock solution 20℃ 7-8 minutes

ISO400 KODAK D-76 1+1 20℃ 13-14 minutes

☆Precautions for use☆

*We use an original spool from Kawaso Shoten that can be used with many best-format cameras, including the Baby Rollei.

*The spool is manufactured so that it can be used with many cameras.

Since many cameras were manufactured over 50 years ago, individual differences are likely to be greater than they are now.

Therefore, please be aware that some cameras may not be usable, even if they are listed as compatible.

This camera has been investigated and reported to be used as of June 30, 2018.

[Both loading side and winding side OK]

◎ROLLEIFLEX 44 (Baby Rollei):ROLLEIFLEX 44 (Baby Rollei)

◎Primo Jr: PRIMO-JR

◎Sawyer’s Mark 4: SAWYER’S MARK Ⅳ

◎YASHICA-44

◎YASHICA44LM:YASHICA44LM

◎RICOH SUPER 44

◎KOMAFLEX:KOMAFLEX

[Only the packaging side is OK]

☆Unconfirmed

[Cameras that require attention]

★Minolta Miniflex: Minolta Miniflex (Please sand the shaft a little thinner with sandpaper)

【Usage prohibited】

☆Unconfirmed

*127 roll film is highly sensitive to light, so be sure to load and remove it from the camera in a dimly lit area.

Please be careful not to loosen the winding after shooting.

Also, be sure to place the film in the included black film case to protect it from light before and after use.

If you don't do this, it will be exposed to light and the backing paper will be reflected.

*When using or developing film that has been refrigerated or frozen, please gradually return it to room temperature before use. Please leave the package in the package for at least 6 hours if refrigerated or at least 12 hours if frozen before use.

If you use it under dew condensation, the emulsion surface may stick or water droplets may appear in the image.