The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise, it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult us.
Introduction:
1. This is a multi-function inverter/charger, combining functions of inverter, solar charger, and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operations such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
2. The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real-time and output pure sine wave to convert DC into AC.
3. It can be widely used in DC to AC areas, such as solar AC power systems, vehicle systems, RV power supply, security monitoring systems, emergency lighting systems, field power systems, household power systems, etc.
4. This PowMr off-grid solar inverter all-in-one does not support parallel operation, and does not support phase separation!
(Single phase/A Hot Leg 230V Output, Can not Output 110V AC)
Advantages:
🌟【PURE SINE WAVE INVERTER】6200W Off-Grid 48V Solar Inverter Built-in 120A MPPT Charge Controller, Pure Sine Wave Inverter Single-phase output 230VAC, 6 kW new all-in-one inverter combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in a single package.
🌟【TECHNICAL PARAMETERS】120A MPPT Solar Charging Inverter, MAX. PV Array Power: 6500W, Max.PV Open Circuit Voltage: 500Vdc; Starting voltage >150V, MAX. Charging Current:120A, PV Array MPPT Voltage Range: 90~450Vdc; Cold start function(46V).
🌟【RBG LIGHT FOR DIFFERENT WORKING MODE】PowMr Hybrid Inverter LOGO Can Display Four Different colors of RBG light, Stationary Mode: white light, PV Mode: purple light, Battery Mode: Red light, Utility Mode: blue light. You can know the working mode of the inverter by the colors of the logo light.
🌟【One Click Restore Default Settings】6.2KW All in One MPPT inverter can restore the system settings by one key in case of a setting error, avoiding the machine damage caused by a setting error. with battery cold start function(46V) , and automatic restart while AC is recovering to protect your system well.
🌟【DIVERSIFIES USES】48V Inverter with Smart battery charger design for optimized battery performance; Compatible with mains voltage or generator power; Can be accessed to a variety of household and office loads, including refrigerators, lamps, televisions, fans, air conditioning, and other loads. 4 charging modes support: Utility first, Solar first, Solar&Utility and Battery & Solar.
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Features:
•Pure sine wave inverter
•Configurable input voltage range for home appliances and personal computers via LCD setting
•Configurable battery charging current based on applications via LCD setting
•Configurable AC/Solar Charger priority vía LCD setting
•Compatible with mains voltage or generator power
•Auto restart while AC is recovering
• Overload/ Over temperature/ short circuit protection
•Smart battery charger design for optimized battery performance
•Cold start function
Solar and battery energy will provide power to the loads only when utility power is not available.
If solar energy is not sufficient to power all connected loads, battery energy will supply power the loads at the same time.
If solar energy is insufficient to power all connected loads, battery energy will supply power to the loads simultaneously.
Three-Load Working Mode:
MODEL | POW-HVM6.2M-48V-N |
Phase | 1-phase |
Maximum PV Input Power | 6000W |
Rated Output Power | 6200W |
Maximum Charging Power | 6200W |
GRID-TIE OPERATION | |
PV Input(DC) | |
Nominal DC Voltage/Maximum DC Voltage | 360VDC/500VDC |
Start-up Voltage/initial Feeding Voltage | 120VDC |
MPPT Voltage Range | 90VDC~450VDC |
Number of MPPT Trackers/Maximum Input Current | 1/27A |
GRID OUTPUT(AC) | |
Nominal Output Voltage | 220/230/240VAC |
Output Voltage Range | 195.5-253VAC |
Nominal Output Current | 15.7A 26.1A |
Power Factor | >0.9 |
EFFICIENCY | |
Maximum Conversion Efficiency(DC/AC) | 97% |
OFF-GRID OPERATION | |
AC INPUT | |
AC Start-up Voltage/Anto Restart Voltage | 120-140VAC/180VAC |
Acceptable Input Voltage Range | 90-280VAC OR170-280VAC |
Maximum AC Input Current | 40A |
PV Input(DC) | |
Nominal DC Voltage | 500VDC |
MPPT Voltage Range | 90VDC-450VDC |
Number of MPPT Trackers/Maximum Input Current | 1/27A |
BATTERY MODE OUTPUT(AC) | |
Nominal Output Voltage | 24VDC 48VDC |
Output Waveform | Pure sine wave |
Efficiency(DC to AC) | 94% |
HYBRID OPERATION | |
PV INPUT(DC) | |
Nominal DC Voltage/Maximum DC Voltage | 360VDC/500VDC |
Start-up Voltage/initial Feeding Voltage | 120VDC |
MPPT Voltage Range | 90VDC-450VDC |
Number of MPPT Trackers/Maximum Input Current | 1/27A |
GRID OUTPUT(AC) | |
Nominal Output Voltage | 220/230/240VAC |
Output Voltage Range | 195.5-253VAC |
Nominal Output Current | 15.7A 26.1 A |
AC INPUT | |
AC Start-up Voltage/Anto Restart Voltage | 120-140VAC/180VAC |
Acceptable Input Voltage Range | 90-280VAC or 170-280VAC |
Maximum AC Input Current | 40A |
BATTERY MODE OUTPUT(AC) | |
Nominal Output Voltage | 220/230/240VAC |
Efficiency (DC to AC) | 94% |
BATTERY & CHARGE | |
Nominal DC Voltage | 48VDC |
Maximum Solar Charging Current | 120A |
Maximum AC Charging Current | 80A |
Maximum Charging Current | 120A |
GENERAL | |
PHYSICAL | |
Dimension D *W *H | 420*310*120 |
Net Weight(kgs) | 13 |
INTERFACE | |
Communication Port | RS232/WIFI/BMS |
ENVIRONMENT | |
Humidity | 0-90% |
Operating Temperature | -10 to 50 °C |
1. In utility bypass mode, the device cannot be connected to two-phase 220V AC, i.e. L1-L2 cannot be connected to L-N.
2. In inverter mode, after the device is connected to two-phase 220V, please do not select utility priority for the output priority, so as not to cause safety hazards to the device.
3. Please do not connect the AC output of the device to the autotransformer, so as not to affect the normal service life of the device.