Categories
12V 20A Battery Undervoltage Controller Protection Board Automatic On/Off Load
Description
Product features:
1. Under-voltage automatic break
2. Over-voltage automatic open
3. Under-voltage value can be adjusted
4. Under-voltage automatic load shutdown
5. Over-voltage automatically turn on the load
6. Adjustable parameters memory preservation
1. Under-voltage automatic break
2. Over-voltage automatic open
3. Under-voltage value can be adjusted
4. Under-voltage automatic load shutdown
5. Over-voltage automatically turn on the load
6. Adjustable parameters memory preservation
Product parameters:
Product name: 12V battery undervoltage control module
Product Model: JY601
Input voltage: 12V battery dedicated (battery voltage within 10V-15V control)
Load power: 20A relay
Panel size: 88 * 48 * 26mm (L×W×H)
Installation size: 84 * 44mm (L×W) opening size
Product name: 12V battery undervoltage control module
Product Model: JY601
Input voltage: 12V battery dedicated (battery voltage within 10V-15V control)
Load power: 20A relay
Panel size: 88 * 48 * 26mm (L×W×H)
Installation size: 84 * 44mm (L×W) opening size
Undervoltage value adjustment instructions.
View the current parameters:Press the J1 button to display the currently set undervoltage parameter value.
Set the undervoltage parameter: Press and hold the J1 button until the digital tube flashes, use J1 and J2 to adjust the undervoltage parameter value.
View the current parameters:Press the J1 button to display the currently set undervoltage parameter value.
Set the undervoltage parameter: Press and hold the J1 button until the digital tube flashes, use J1 and J2 to adjust the undervoltage parameter value.
Start value adjustment instructions.
View the current parameters:Press and hold the J2 button to display the value of the currently set start-up parameters.
Set the start-up parameter: Press and hold the J2 button until the digital tube flashes, and use J1 and J2 to adjust the start-up parameter value.
View the current parameters:Press and hold the J2 button to display the value of the currently set start-up parameters.
Set the start-up parameter: Press and hold the J2 button until the digital tube flashes, and use J1 and J2 to adjust the start-up parameter value.
Delay function: disconnect the load after the voltage is lower than the undervoltage value for 6 seconds, the voltage is lower than the undervoltage value within 6 seconds back up to keep the load output, this function prevents the high current from pulling down the voltage and stop when starting.
Product list:
1* Undervoltage controller
1* Undervoltage controller
12V 20A Battery Undervoltage Controller Protection Board Automatic On/Off Load
Description
Product features:
1. Under-voltage automatic break
2. Over-voltage automatic open
3. Under-voltage value can be adjusted
4. Under-voltage automatic load shutdown
5. Over-voltage automatically turn on the load
6. Adjustable parameters memory preservation
1. Under-voltage automatic break
2. Over-voltage automatic open
3. Under-voltage value can be adjusted
4. Under-voltage automatic load shutdown
5. Over-voltage automatically turn on the load
6. Adjustable parameters memory preservation
Product parameters:
Product name: 12V battery undervoltage control module
Product Model: JY601
Input voltage: 12V battery dedicated (battery voltage within 10V-15V control)
Load power: 20A relay
Panel size: 88 * 48 * 26mm (L×W×H)
Installation size: 84 * 44mm (L×W) opening size
Product name: 12V battery undervoltage control module
Product Model: JY601
Input voltage: 12V battery dedicated (battery voltage within 10V-15V control)
Load power: 20A relay
Panel size: 88 * 48 * 26mm (L×W×H)
Installation size: 84 * 44mm (L×W) opening size
Undervoltage value adjustment instructions.
View the current parameters:Press the J1 button to display the currently set undervoltage parameter value.
Set the undervoltage parameter: Press and hold the J1 button until the digital tube flashes, use J1 and J2 to adjust the undervoltage parameter value.
View the current parameters:Press the J1 button to display the currently set undervoltage parameter value.
Set the undervoltage parameter: Press and hold the J1 button until the digital tube flashes, use J1 and J2 to adjust the undervoltage parameter value.
Start value adjustment instructions.
View the current parameters:Press and hold the J2 button to display the value of the currently set start-up parameters.
Set the start-up parameter: Press and hold the J2 button until the digital tube flashes, and use J1 and J2 to adjust the start-up parameter value.
View the current parameters:Press and hold the J2 button to display the value of the currently set start-up parameters.
Set the start-up parameter: Press and hold the J2 button until the digital tube flashes, and use J1 and J2 to adjust the start-up parameter value.
Delay function: disconnect the load after the voltage is lower than the undervoltage value for 6 seconds, the voltage is lower than the undervoltage value within 6 seconds back up to keep the load output, this function prevents the high current from pulling down the voltage and stop when starting.
Product list:
1* Undervoltage controller
1* Undervoltage controller
