Flowfit Hydraulic Cetop 3 NG6 3 Position Solenoid Directional Control Valve
FLOWFIT CETOP 3 NG6 2 POSITION SOLENOID VALVE
Flowfit offer a large range of solenoid operated CETOP 3 NG6 valves, max flow 80 l/min commonly used in hydraulic power packs and other hydraulic applications.
Available Voltage: 12 V DC, 24 V DC, 48 V DC, 110 V AC 50Hz and 220 V AC 50Hz
Flowfit F5-02 series CETOP 3 NG6 solenoid valves are electro-hydraulic spool type valves. They are solenoid operated and control the start, stop and direction of the oil flow in the hydraulic circuit.
Specification:-
Nominal Size: NG6
Maximum Flow Rate: 80 l/min
Maximum Pressure: A, B ,P = 315 Bar T = 16 Bar
Seal Material: - NBR
Max Fluid Temperature: -20 degrees celcius to +70 degrees celcius.
Oil Viscosity: - 2.8 to 380 mm2/s
Switch Cycles Open: - 50 to 60 ms.
Switch Cycles Closed: - 50 to 70 ms.
Switch Frequency: 15000 times per hour.
Insulation Grade: IP65
Weight: Double Solenoid: 2.2kg
Voltages: 12VDC = D1, 24VDC = D2, 110V/AC 50HZ = A1, 220V/AC 50HZ = A2
Manual Override: Standard on all valves
Connector Type: DIN Plug (with LED)
Spool Types:-
All Ports Blocked (3C2 Spool Type)
All Ports Open (3C3 Spool Type)
P Blocked, A&B to T (3C4 Spool Type)
P&A to T, B Blocked (3C5 Spool Type)
T Blocked, P to A&B (3C9 Spool Type)
P&A Blocked, B to T (3C10 Spool Type)
B&T Blocked, P to A (3C11 Spool Type)
P&B Blocked, A to T (3C12 Spool Type)
P&B to T, A Blocked (3C25 Spool Type)
P Blocked, A&B Choked to T (3C40 Spool Type)
P to T, A&B Blocked (3C60 Spool Type)