This tool is a portable, multipurpose cable tester. For communications engineering professionals, wiring engineering personnel, network maintenance personnel, and others, it is a crucial test tool because the cable application type is improved, the function is increased, and the application scope is greater.
|
|
|
---|---|---|
Find BreaksWhen the breakpoint is reached, the tone will weaken and then disappear. |
External EarphonesThis Cable Tester is equipped a pair of 3.5mm earphones that can be connected to the the receiver earphone jack to improve efficiency in a noisy environment. |
Conductor detection continuously (path)There are two ways to detect the connectivity of lines: a)OnIy use the transmitter to detect. Turn on the power of the transmitter,turn on the power indicator light,and the transmitter starts to work. Then pull the function knob switch to the "CONT" position, and clamp the red and black clamps to both ends of the line to be tested. If the impedance indicator light is on,the line is continuous. The smaller the line impedance is,the more the indicator lights are on. If it is more than 1K, it is considered that the line is not connected. If it is less than 1K, every 100 CI Iess,one more lamp will be lit. |
|
|
|
---|---|---|
Detection ProbeThe 24 inch long, flexible, and easily precise line location probe is straightforward to use. |
Rechargeable BatteryDifferent from other tester, this wire locator has built-in 3.7V battery, with low battery indicator, which can solve problems that require frequent battery replacement. |
Low-power signalWhen the battery voltage of the receiver is lower than about 3.5V, all other indications, excluding the charging indicator, flash five times to remind charging in a timely manner and then turn off automatically. The power indicator on the transmitter will flash five times to alert the user that the transmitter's battery needs to be replaced when it is around 6V below the working voltage, and it will switch off automatically after flashing five times. |
NOTE: The receiver volume adjustment knob is modified to adjust the received signal strength