Features:
*Short Circuit Protection: This battery charger board features short circuit protection and self-healing delay, providing a safe charging experience.
*Applicable Scope: This charger board is compatible with a wide range of products, including battery massager units, LED lamp backup power supplies, 12V electronic products, solar street light batteries, monitor backup power supplies, and more.
*Note: The discharge rate of the 3A discharge products is higher, reaching up to 3C or more.
*Magnification Formula: By increasing the battery by 1C, the capacity of 2000mAh, for example, becomes equal to 2Ah * 1, setting the upper limit current at 2A. With a 3C increase, the capacity of 2000mAh becomes 2Ah * 3, and the upper working current is 6A.
*Efficient Charging: This battery charger board ensures efficient and reliable charging for your 3S 10A 11.1V 12V 12.6V batteries, allowing you to maximize their performance.
Specifications:
Part Name:Battery Charger Module
Material:Metal
Size:53*17*4.0mm/2.09*0.67*0.16inch(Approx.)
Color:Blue
*Overcharge voltage range: 4.25-4.35v±0.05v
*Overdischarge voltage range: 2.3-3.0v±0.05v
*Upper working current: 6-8A
*Operating temperature: -40-- +50° C
*Upper instantaneous current: 10-13A
*Storage conditions: -40--+80° C
*Static current: less than 30uA
*Effective life: more than 30,000 hours
*Internal resistance: less than 100mΩ
*Short-circuit protection: can be protected, delay self-recovery.
*Charging voltage: 12.6V-13V
Package Content:
1*Battery Charger Module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
3.The battery will heat up when using, this means that the battery is not applied, please do not continue to use due to the battery will be damaged soon.
4.The protection board cannot be used for Lithium Iron Phosphate Battery, Hernia Lamp, Hand Drill Battery, Electric Fish Machine Battery, Electric Bike Battery, Kids Car Battery, 775(4A) Motor, 1W LED Fisheye Light!
Precautions:
1. Please strictly follow the wiring of 0V(B-), 3.7V(B1), 7.4V(B2), 11.1V(B+), do not intentionally short-circuit.
2. Please charge after connecting the line, then it will have output.
3. When connecting three groups of batteries, make sure that the voltage of each group of batteries, if not the same, fill each battery separately, and then use in series. Discharge test, the voltage drops rapidly when the battery group differs in time.
4. Please don't mix battery and bad battery together! 3 sets of battery capacity/resistance closer to the best! (Two Good Batteries + 1 Bad Battery Use Effect = 3 Bad Battery Use Effects).