Assembly foam masonry mortar adhesive foam CEMENT PU gun foam 24pcs x 850ml

Masonry mortar professional "VASmann-CEMENT" - a polyurethane one-component composition in a sealed aerosol packaging. Designed for the construction of structures made of bricks, foam, aerated concrete and other porous blocks as a binder solution. Suitable for indoor and outdoor use, polymerizes under the influence of moisture. For the usual preparation of mortar, no tools and containers are required (except for a mounting foam gun), as well as the consumption of electricity and water.

Characteristics:
Performance: 50 m
Shelf life: 12 months.
Application temperature: from - 5 to +35°С
Volume: 850 ml
Weight: 990 gr
Advantages:
  • Inexpensive adhesive foam, no pre-treatment, ready to use or 
  • Simple and quick work (productivity up to 50 linear meters of masonry). Technological breaks to “mature” the solution are not required
  • It has increased adhesion to most materials (brick, concrete, wood, aerated concrete, metal profile, drywall, etc.)
How to use masonry mortar:
1) Screw the foam glue bottle onto the assembly gun. Shake for 30 seconds
2) Moisten the installation site with a sprayer before and after work
3) Adjust the product feed rate with the assembly gun screw
4) Apply adhesive foam to the block with a strip with a diameter of 2-3 cm on the base and the vertical seam
5) Lay the block within 3 minutes of applying the glue. Level the block

  • The surface at the workplace should be thoroughly cleaned of dirt, dust and oil stains.
  • When using the product, the temperature of the foam bottle recommended by the manufacturer should be strictly adhered to.
  • Humidifying the workplace allows for better adhesion.
Masonry mortar professional "VASmann-CEMENT" - a polyurethane one-component composition in a sealed aerosol packaging. Designed for the construction of structures made of bricks, foam, aerated concrete and other porous blocks as a binder solution. Suitable for indoor and outdoor use, polymerizes under the influence of moisture. For the usual preparation of mortar, no tools and containers are required (except for a mounting foam gun), as well as the consumption of electricity and water. Simple and quick work (productivity up to 50 linear meters of masonry). Technological breaks to “mature” the solution are not required It has increased adhesion to most materials (brick, concrete, wood, aerated concrete, metal profile, drywall, etc.) When using the product, the temperature of the foam bottle