Product Description
New 1000W Industrial Microwave switching power supply
Remark:
1. The two holes on the case edge are only used for earth ground connection, must connect them to earth ground derectly.
2. Cooling air should be considered properly when mounting the inverter to a microwave equipment, pool cooling may cause the reliability decreased.
3. More than 8KV high voltage inside the inverter, do not touch any components on the board before disconnect the inverter.
Installation method: The AC input "L" power, "N" zero line, "PE" ground symbol connected to the magnetron shell The installation hole must be reliably grounded to prevent accidental electric shock On the back of the mounting holes for mounting connecting to, with the magnetron shell connected to form a high pressure loop, and reliable connection to the equipment metal casing and the enclosure shall be protected.
Specification
|
Output Power:
|
>500W
|
|
FIlament voltage:
|
3.3V
|
|
Filament current:
|
10A
|
|
Anode voltage:
|
4200V
|
|
Rated Power:
|
1280W
|
|
Rated Power:
|
220 - 240V/50-60Hz
|