Product Description

QIOTEK ZealotH743 PIXHAWK Multi version Flight Control PIX Vertical Takeoff and Landing Helicopter UAV Multi Axis

Description

The QioTek ZealotH743 is an internal vibration dampened autopilot with a protective CNC metal case for ruggedness.

 It features fully redundant sensors, an expanded number of outputs, temperature-controlled IMUs, 

and has an integrated AT7456E OSD chip. Available in 3 editions Standard, Industrial and Industry Application, 

you can select packages with and without GPS. 

Check the specs carefully – the Zealot-H743 has higher specs than many competitors!

The Zealot H743 supports all versions of Ardupilot from 4.2.0 including ArduPlane, ArduCopter, ArduRover, ArduSub.


Specification

Processor:

MCU – STM32H743VIT6

36KB FRAM – FM25V02

Standard Edition Sensors

Gyro/Accelerometers: ICM42688P, ICM40605, ICM20689 or ICM40605

Barometers: DPS3018 *2

Compass: QMC5883L

Industrial Edition Sensors

Gyro/Accelerometers: IIM42652 (Invensense Industrial level sensor)，ICM42688P, ICM20689 or ICM40605

Barometers: DPS3018 *2

Compass: QMC5883L

Industry Application Edition Sensors

Gyro/Accelerometers:

ADIS16470 (Analog Devices Industrial Application-level sensor)

This advanced IMU is very good for large aircraft and has good inertial navigation performance and a wide range of operating temperature.

IIM42652 (Invensense Industrial level sensor) and ICM42688P

Barometers: DPS3018 *2

Compass: QMC5883L


Power

4.1-6.0V DC from USB (internal circuitry and RX only) or via 2 x PowerModule connectors, 

or via internal BEC off VBAT input pin. All 5V pins are powered when USB, or Power Module(s), or VBAT input is used.

Internal 5V, 1.5A internal BEC directly can be used with up to 6S LIPO batteries to supply board and peripheral power supply up to 1.5A max with voltage monitoring via BAT2 monitor(500ma max recommended).

ADC monitoring of board voltage

ADC monitoring of Servo/Output’s power rail


Interfaces/Connectivity

14 PWM Outputs with independent power rail for external power source

4 Relay outputs

MicroSD card slot

Micro USB or remote USB via a JST_GH connector

Built-in RGB LED (On three sides)

Built-in AT7456E OSD

FD-CAN interface *2

Two voltage & current monitoring and servo rail voltage monitoring(support to 36V)

Two ADC inputs(default one for RSSI, one for Airspeed sensor, both support to 6.6V)

Servo rail BEC independent power input for servos

Built-in BEC (6S 1.5A) power input (share power2 module voltage monitoring)

UART interface *5


Package Included:

External safety Switch/Buzzer *1

External 60V/14S power module *1

I2C/CAN splitter board *1

Cables *1

32G SD Card for logging, scripts and terrain data *1

Mounting tape *1

USB-C/Standard USB cable *1

Dimensions

Weight：65g

Size：42mm x 65mm x 25mm






 Welcome to our store, we are doing FEICHAO brand products, our factory mainly do the metal parts of the camera accessories, the price is the factory price, wholesale price, we have a large number of inventory shipments fast, the need for large quantities of wholesale can contact me, I can give you the highest discount price!

1. All price does not include any taxes or extra fees. We are not responsible for the problems caused by customs clearance. 

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 

4. The images shown are not the actual item and are for your reference only. 

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season. 

6. If you have not received your order after the Estimated Delivery of Shipping Method, please contact us in advance. We will trace your order and get back to you asap.

(Please notice that we can't decide your decisions about choosing to ship methods, which means you need to check carefully with the estimate delivery time and promise delivery time) Your satisfaction is our top priority!


1. You have 30 days to contact us  No reason to return within 30 days after signing，The shipping cost is Seller . 

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID. 

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from ebay. OR, you may choose to have a replacement. 

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.


We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback so that we can perform up to your satisfaction. 

It is impossible to address issues if we do not know about them!

About Us

 Welcome to our store, we are doing FEICHAO brand products, our factory mainly do the metal parts of the camera accessories, the price is the factory price, wholesale price, we have a large number of inventory shipments fast, the need for large quantities of wholesale can contact me, I can give you the highest discount price!

Shipping

1. All price does not include any taxes or extra fees. We are not responsible for the problems caused by customs clearance. 

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 

4. The images shown are not the actual item and are for your reference only. 

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season. 

6. If you have not received your order after the Estimated Delivery of Shipping Method, please contact us in advance. We will trace your order and get back to you asap.

(Please notice that we can't decide your decisions about choosing to ship methods, which means you need to check carefully with the estimate delivery time and promise delivery time) Your satisfaction is our top priority!


Returns

1. You have 30 days to contact us  No reason to return within 30 days after signing，The shipping cost is Seller . 

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID. 

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from ebay. OR, you may choose to have a replacement. 

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.


Feedback

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback so that we can perform up to your satisfaction. 

It is impossible to address issues if we do not know about them!

powered by tongtool