Titman Edge Tools TCT Extra Fine Finish Mitre Saw Crosscutting Saw Blade - 250mm x 30mm x 72 Tooth TCT - TB2507230N

Titman Edge Tools TCT Extra Fine Finish Mitre Saw Crosscutting Sawblade 250mm diameter, 30mm bore, 48 Tooth TCT. For fine finish crosscutting. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both. And there's no need to use expensive PTFE sprays to protect your saw blades. Specification: Bore: 30mm Diameter: 250mm Tooth Count: 72 Max Speed: 9,500 RPM Kerf: 3mm Rake: Negative 5 º Hook Tooth Form: Negative ATB Material Type: Machine Type: Fine Finish Mitre Saw Product Code: TB2507230N Quick Ref Number: 36 Weight: Understanding Saw Blade Specification: TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and/or chipping at the edges Kerf: The term "kerf" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut Rake/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5 º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut APSC Coated Saw Blades - the Benefits reduced friction between the blade and the material to being cut reduced heat build-up in the blade blade cuts quieter increased blade lifespan blade stays sharp for longer protection against the blade rusting

Titman Edge Tools TCT Extra Fine Finish Mitre Saw Crosscutting Saw Blade - 250mm x 30mm x 72 Tooth TCT - TB2507230N

Titman Edge Tools TCT Extra Fine Finish Mitre Saw Crosscutting Sawblade 250mm diameter, 30mm bore, 48 Tooth TCT. For fine finish crosscutting.

Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting.

During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade.

Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer.

In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.

And there's no need to use expensive PTFE sprays to protect your saw blades.

Specification:

Bore: 30mm
Diameter: 250mm
Tooth Count: 72
Max Speed: 9,500 RPM
Kerf: 3mm
Rake: Negative 5 º Hook
Tooth Form: Negative ATB
Material Type:
Machine Type: Fine Finish Mitre Saw
Product Code: TB2507230N
Quick Ref Number: 36
Weight:

Understanding Saw Blade Specification:

TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also uséd on blades for cutting non-ferrous material, like aluminium or plastics
ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and/or chipping at the edges
Kerf: The term "kerf" is uséd to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut
Rake/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5 º, are uséd to prevent self-feeding of materials and give the operator maximum control over the feed of cut