Garage Door Remote 433.92 MHz For Chamberlain Liftmaster Motorlift 94335E 8433XE

Specification:

Product name: Garage Door Remote

Condition: New

Material: metal,plastic

Color: Black

Button: 4

Frequency: 433.92MHz

Codes: Rolling code technology

Battery: 3V CR2032 (Include )

Distance: Up to 100 meters

Dimension: 60.8x30.6x12mm

Quantity: 1/2/3/4pcs

Fitment:

• New Rolling Code Compatible Remote control fully compatible with Chamberlain Liftmaster Motorlift 94335e& 84335e type rolling code remote control system 

• This Remote is not compatible with 4335e, 4330e and 4333e remotes (these are without an 8 or 9 ) !!!

• Suits a variety of garage door openers manufactured by; Chamberlain Liftmaster, Garador Autodor, Catnic Autodor, Wickes, Motorlift and Screwfix.

• Compatible with follow CHAMBERLAIN LIFTMASTER MOTORLIFT REMOTE CONTROLS:

  84330E, 94334CE, 94333E, 94334E, 94335E, 9747E,1A5639-7, 1A5477, 1A6487, 132B2372, D-66793, WICKES156105, 84333E, 84335E, 8747E, 84330EML, 84333EML, 84335EML, 8747EML, 94330E, 94330EWK, 94330EML, 94333EML, 94335EML,94334HD,

• Compatible with follow gate openers:

  MotorLift (ML500) (produced after 10.2006), 

  MotorLift 700 (ML700), 

  MotorLift 750 (ML750), 

MotorLift 850 (ML850),

HC280

HC100ML (produced after 10.2006),

MotorLift HC300ML (produced after 10.2006),

MotorLift HC400ML (produced after 10.2006),

MotorLift HC500ML (produced after 10.2006),

MotorLift HC600ML (produced after 10.2006),

Power Drive GPD60, GPD65, GPD 80, TPD10, TPD500

• Compatible with follow GRIFCO REMOTE CONTROLS:

  GC844, CG844

• Compatible with follow MERLIN + REMOTE CONTROLS:

  C840, C940, C943, C945, CM842, CM844, CM128 

• Compatible with follow MERLIN + GATE OPENERS:

  HE60, MGA600, MGL300, MGL400, MGS500, MGS500T, MGS000, MGS 1000T, MJ3800, MJ3800R, ML500, ML700, MLR70, MLR850, MR60, MR60, MR600A, MR650, MR800, MR800A, MR850, MR1000, MT60, MT60P, MT230, MT600, MT800, MT1000, MT3850, MT5580, MT5580P

• Compatible only with 433mhz Rolling Code receivers !!!

  These are prefix 8 or 9 ie: - 94330E & 94333E or 84330 & 84333E hand transmitters !!!

How to program this replacement remote control:

1) Press the programming button on your motor. The LED will go on.

2) Press desired button on the new remote control.

3) The opener light will flash, confirming successful programming. Now the opener will operate when the remote control push button is pressed.

To erase all codes from the receiver, hold the receiver's Learn button until the indicator light goes off (after 6 seconds). All codes that the receiver has learned will be erased.

Note:

1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.

2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)

3.There Are No Instructions Included In This Kit.Professional Installation Is Highly Recommended!

Package Includes:

1x/2x/3x/4x Garage Door Remote