Description: 1.Dual power supply (two power supplies cannot be powered at the same time): Power supply 1, DC 6.5-25V; Power supply 2, DC 5V 2.Working current: (Normal Mode) standby current 41mA, working current 83mA; (Energy-Saving mode) Standby current 7mA, working current 45mA. 3.There are three input control ports: forward control(FWD), reverse control(REV), and stop control(STOP). 4.Two input trigger modes, Low-Pulse trigger mode, Low-Level trigger mode 5.Delay time: 0.1-999.9 seconds, 1-9999 seconds, 1-9999 minutes. 6.Cycle times: no cycle, 2-99 cycles, always cycle. 7.Three indicators: forward indicator(F LED), reverse indicator(R LED), stop indicator(S LED). 8.6 functional modes. 9. Relay load current, recommended less than 5A. 10. Size: 80*50*19mm 11. Weight: about 50 grams
This is a multi-function DC/AC motor forward and reverse controller with multiple control modes. Many control functions can be derived through reasonable settings.
Port: DC 5.5MM female : Power supply 1, DC 5V power supply. VIN : Power 2 positive, DC 6.5-25V power supply GND : Power supply 2 negative FWD : Forward input control (partial Function-Mode is invalid) REV : Reverse input control (partial Function-Mode is invalid) STOP : Stop input control (partial Function-Mode is invalid) M+ : Motor positive M- : Motor negative P+ : Positive motor power supply P- : Negative motor power supply
Package include: 1Pcs Multifunction AC/DC motor forward and reverse controller