• Product Features:
  •  
  •  * Fits either LH (Driver Side) or RH (Passenger Side) Rear
  •  * Fits 5 Lugs Wheels  * Wheel studs already installed
  •  
  • Item Description:
  •  
    • Brand New Wheel Hub Assembly
    • Direct replacement
    • Built to strict quality control standards
    • Replaces dealer part numbers: 512269,G14V2615X, G14V2615XA, G14V2615XB,712269
     
  • Vehicle Fitment:
  •  
    • Fits Mazda Millenia 2001-2002
    • Fits Mazda Mpv 2000-2006
    • Fits Mazda Protege 2000-2003
     
  • Package Include:
  •  
  • 1 Pcs wheel hub bearing
  •  
  • Rear Driver Or Passenger Wheel Hub Bearing For Mazda Protege Mpv Millenia W/ ABS

    Product Features:

     

     * Fits either LH (Driver Side) or RH (Passenger Side) Rear

     * Fits 5 Lugs Wheels
     * Wheel studs already installed

     

    Item Description:

     

    • Brand New Wheel Hub Assembly
    • Direct replacement
    • Built to strict quality control standards
    • Replaces dealer part numbers: 512269,G14V2615X, G14V2615XA, G14V2615XB,712269

     

    Vehicle Fitment:

     

    • Fits Mazda Millenia 2001-2002
    • Fits Mazda Mpv 2000-2006
    • Fits Mazda Protege 2000-2003

     

    Package Include:

     

    1 Pcs wheel hub bearing

     

    1 Year Warranty

     

     

    Exploded View:

     

     

    1. Wheel hub and bearing
    2. Cotter pin
    3. Nut retainer
    4. Wheel hub lock nut
    5. Hub bolt
    6. Splash guard
    7. Steering knuckle

     

    Removal:

     

     

    1. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    2. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    3. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    4. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    5. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    6. Remove the engine side cover. 
    7. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle. 
    8. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    9. Remove the wheel hub and bearing bolts using power tool.
    10. Remove the splash guard and the wheel hub and bearing from the steering knuckle.

     

    NOTE:

     

    • Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    • Pull out the front wheel sensor, being careful to turn it as little as possible.
    • Do not pull on wheel sensorharness.

     

    Inspection after removel : Check components for deformationy,cracksy,and other damagey,and  boots of transverse link ball joint for cracksy,axial end play,and swing torque. 

     

    Installation:

     

    Installation is in the reverse order of the removal

     

    Caution:

     

    1. Do not reuse the wheel stud.
    2. Do not reuse the cotter pin.
    3. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    4. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    5. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

     

     

        6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

        7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

        8.  When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

        9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

    ?


    Item Specifics
    Manufacturer Part Number Sinwon065882
    Placement on Vehicle Driver Side or Passenger Side Rear or Front
    Interchange Part Number 512269 wheel bearings
    Fitment For Mazda
    ABS Sensor Has ABS with Tone Ring Sensor
    Brand SINWON
    Manufacturer Warranty 1 Year
    Finish Polished, Rust Protected
    Bolt Quantity 5
    Flange Bolt Hole qty N/A
    Spline Quantity N/A
    Bolt Circle Diameter 4.46 In
    Wheel Pilot Diameter 2.34 In
    Brake Pilot Diameter 2.6091 In
    Flange Diameter 5.45 In
    OE/OEM Part Number G14V2615X, G14V2615XA, G14V2615XB
    Material steel
    Fitment type Direct replacement
    Weight 6LB
    Package include 1 X wheel bearing
    Vintage Part No
    Type Wheel Hub & Bearing Assembly
    Anti-lock Braking System Yes
    Vintage Car Part No
    Vintage Car Part No
    Type Wheel Hub & Bearing Assembly
    Anti-lock Braking System Yes

    Payment
    PayPal preferred.
    ☆ We will only ship to the confirmed PayPal shipping address given with the payment.
    ☆ Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
    Shipping
    ☆ All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    ☆ We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
    ☆ The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    ☆ We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    Returns
    ☆ We stand behind every product we sell.
    ☆ All of our brand new items come with a 30-Days money-back guarantee.
    ☆ We define the item as defective only if it doesn't function as described.
    ☆ It is the buyer's responsibility to understand the item description before bidding.
    ☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
    ☆ Man-made damage by  abuse or wrong operation is not covered by this warranty.
    ☆ No  product liability insurance is assumed.
    ☆ Return shipping is to be paid by the Buyer.
    Contact Us
    ☆ We are always been trying to provide best service and reliable products for every customer.
    ☆ If you are satisfed with the product you recieved, please have a good share.
    ☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to  reslove any problem for you.

    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Rear Driver Or Passenger Wheel Hub Bearing For Mazda Protege Mpv Millenia W/ ABS

    Product Features:

     

     * Fits either LH (Driver Side) or RH (Passenger Side) Rear

     * Fits 5 Lugs Wheels
     * Wheel studs already installed

     

    Item Description:

     

    • Brand New Wheel Hub Assembly
    • Direct replacement
    • Built to strict quality control standards
    • Replaces dealer part numbers: 512269,G14V2615X, G14V2615XA, G14V2615XB,712269

     

    Vehicle Fitment:

     

    • Fits Mazda Millenia 2001-2002
    • Fits Mazda Mpv 2000-2006
    • Fits Mazda Protege 2000-2003

     

    Package Include:

     

    1 Pcs wheel hub bearing

     

    1 Year Warranty

     

     

    Exploded View:

     

     

    1. Wheel hub and bearing
    2. Cotter pin
    3. Nut retainer
    4. Wheel hub lock nut
    5. Hub bolt
    6. Splash guard
    7. Steering knuckle

     

    Removal:

     

     

    1. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    2. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    3. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    4. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    5. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    6. Remove the engine side cover. 
    7. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle. 
    8. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    9. Remove the wheel hub and bearing bolts using power tool.
    10. Remove the splash guard and the wheel hub and bearing from the steering knuckle.

     

    NOTE:

     

    • Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    • Pull out the front wheel sensor, being careful to turn it as little as possible.
    • Do not pull on wheel sensorharness.

     

    Inspection after removel : Check components for deformationy,cracksy,and other damagey,and  boots of transverse link ball joint for cracksy,axial end play,and swing torque. 

     

    Installation:

     

    Installation is in the reverse order of the removal

     

    Caution:

     

    1. Do not reuse the wheel stud.
    2. Do not reuse the cotter pin.
    3. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    4. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    5. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

     

     

        6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

        7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

        8.  When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

        9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

    ?

    Item Specifics
    Manufacturer Part Number :Sinwon065882
    Placement on Vehicle :Driver Side or Passenger Side Rear or Front
    Interchange Part Number :512269 wheel bearings
    Fitment :For Mazda
    ABS Sensor :Has ABS with Tone Ring Sensor
    Brand :SINWON
    Manufacturer Warranty :1 Year
    Finish :Polished, Rust Protected
    Bolt Quantity :5
    Flange Bolt Hole qty :N/A
    Spline Quantity :N/A
    Bolt Circle Diameter :4.46 In
    Wheel Pilot Diameter :2.34 In
    Brake Pilot Diameter :2.6091 In
    Flange Diameter :5.45 In
    OE/OEM Part Number :G14V2615X, G14V2615XA, G14V2615XB
    Material :steel
    Fitment type :Direct replacement
    Weight :6LB
    Package include :1 X wheel bearing
    Vintage Part :No
    Type :Wheel Hub & Bearing Assembly
    Anti-lock Braking System :Yes
    Vintage Car Part :No
    Vintage Car Part :No
    Type :Wheel Hub & Bearing Assembly
    Anti-lock Braking System :Yes


    PayPal preferred.
    ☆ We will only ship to the confirmed PayPal shipping address given with the payment.
    ☆ Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
    ☆ All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    ☆ We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
    ☆ The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    ☆ We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    ☆ We stand behind every product we sell.
    ☆ All of our brand new items come with a 30-Days money-back guarantee.
    ☆ We define the item as defective only if it doesn't function as described.
    ☆ It is the buyer's responsibility to understand the item description before bidding.
    ☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
    ☆ Man-made damage by  abuse or wrong operation is not covered by this warranty.
    ☆ No  product liability insurance is assumed.
    ☆ Return shipping is to be paid by the Buyer.
    ☆ We are always been trying to provide best service and reliable products for every customer.
    ☆ If you are satisfed with the product you recieved, please have a good share.
    ☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to  reslove any problem for you.

    SINWONPARTS All rights reserved.