• Specifications:
  • 1) Thickness: 2.5" / 64mm
  • 2) Vehicle Bolt Pattern(PCD): 8x6.5" / 8x165.1mm
  • 3) Wheel Bolt Pattern(PCD): 8x6.5" / 8x165.1mm
  • 4) Hub Diameter: 126mm / 4.96"
  • 5) Thread Size: 9/16"x18
  • Note:Please make sure you take the proper neasurements gefore purchasing
  •  
  • Package include:
  • 2Pcs Wheel Spacers Adapters
  •  
  • What should I pay attention to during installation?
  • 1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.
  • 2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.
  • 2x For Ford F250 E250 Dodge Ram 2500 3500 2.5 Inch 8x6.5 Wheel Spacers 9/16"x18

    Specifications:

    1) Thickness: 2.5" / 64mm

    2) Vehicle Bolt Pattern(PCD): 8x6.5" / 8x165.1mm

    3) Wheel Bolt Pattern(PCD): 8x6.5" / 8x165.1mm

    4) Hub Diameter: 126mm / 4.96"

    5) Thread Size: 9/16"x18

    Note:Please make sure you take the proper neasurements gefore purchasing

     

    Package include:

    2Pcs Wheel Spacers Adapters

     

    What should I pay attention to during installation?

    1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.

    2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.

    3) DO NOT proceed if both of the wheel spacer do not fit.

    4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.

    5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).

    6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
    7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.

    8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.

     

    About the wheel bolts:

    Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
    1) Shorten the factory studs.
    2) The wheels need to have the open slots (cavities) between mounting holes.
    3) Purchase a set of shorter studs and replace them with the factory studs.

     

    Vehicle Fitment Information:

    Dodge:
    Dodge Ram 2500 1994-2010
    Dodge Ram 3500 1994-2010

     

    Ford:
    Ford E-250 2003-2013
    Ford E-250 Econoline 1992-2002
    Ford E-350 Econoline 1992-2000
    Ford F-250 1988-1998
    Ford F-350 1988-1997

     

    Ram:
    Ram 2500 2011
    Ram 3500 2011


    Item Specifics
    Brand sinwonparts
    Manufacturer Part Number SI127840W01
    Interchange Part Number 8x6.5 / 8x165.1 Wheel Spacers 8 Lug
    Other Part Number 2.5" or 64mm Thick Wheel Spacers
    Superseded Part Number fits 1994-2010 2005 Dodge Ram 2500 3500
    Thickness 2.5" or 2.5 Inch or 64mm
    Thread Size 9/16"x18
    Stud Grade 10.9
    Vehicle Bolt Pattern 8x6.5" or 8x165.1mm
    Wheel Bolt Pattern 8x6.5" or 8x165.1mm
    Material High Grade 6061-T6 Billet Aluminum
    Surface Finish CNC Machined Polished Aluminum Finish
    Color Silver
    Placement on Vehicle Left
    Vehicle Fitment For Dodge Ford Ram
    Center Bore Size 126mm
    Hub Centric No
    Quantity 2pcs
    Manufacturer Warranty 1 Year
    Type Wheel Spacers

    Payment
    PayPal preferred.
    ☆ We will only ship to the confirmed PayPal shipping address given with the payment.
    ☆ Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
    Shipping
    ☆ All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    ☆ We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
    ☆ The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    ☆ We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    Returns
    ☆ We stand behind every product we sell.
    ☆ All of our brand new items come with a 30-Days money-back guarantee.
    ☆ We define the item as defective only if it doesn't function as described.
    ☆ It is the buyer's responsibility to understand the item description before bidding.
    ☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
    ☆ Man-made damage by  abuse or wrong operation is not covered by this warranty.
    ☆ No  product liability insurance is assumed.
    ☆ Return shipping is to be paid by the Buyer.
    Contact Us
    ☆ We are always been trying to provide best service and reliable products for every customer.
    ☆ If you are satisfed with the product you recieved, please have a good share.
    ☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to  reslove any problem for you.

    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    2x For Ford F250 E250 Dodge Ram 2500 3500 2.5 Inch 8x6.5 Wheel Spacers 9/16"x18

    Specifications:

    1) Thickness: 2.5" / 64mm

    2) Vehicle Bolt Pattern(PCD): 8x6.5" / 8x165.1mm

    3) Wheel Bolt Pattern(PCD): 8x6.5" / 8x165.1mm

    4) Hub Diameter: 126mm / 4.96"

    5) Thread Size: 9/16"x18

    Note:Please make sure you take the proper neasurements gefore purchasing

     

    Package include:

    2Pcs Wheel Spacers Adapters

     

    What should I pay attention to during installation?

    1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.

    2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.

    3) DO NOT proceed if both of the wheel spacer do not fit.

    4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.

    5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).

    6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
    7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.

    8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.

     

    About the wheel bolts:

    Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
    1) Shorten the factory studs.
    2) The wheels need to have the open slots (cavities) between mounting holes.
    3) Purchase a set of shorter studs and replace them with the factory studs.

     

    Vehicle Fitment Information:

    Dodge:
    Dodge Ram 2500 1994-2010
    Dodge Ram 3500 1994-2010

     

    Ford:
    Ford E-250 2003-2013
    Ford E-250 Econoline 1992-2002
    Ford E-350 Econoline 1992-2000
    Ford F-250 1988-1998
    Ford F-350 1988-1997

     

    Ram:
    Ram 2500 2011
    Ram 3500 2011

    Item Specifics
    Brand :sinwonparts
    Manufacturer Part Number :SI127840W01
    Interchange Part Number :8x6.5 / 8x165.1 Wheel Spacers 8 Lug
    Other Part Number :2.5" or 64mm Thick Wheel Spacers
    Superseded Part Number :fits 1994-2010 2005 Dodge Ram 2500 3500
    Thickness :2.5" or 2.5 Inch or 64mm
    Thread Size :9/16"x18
    Stud Grade :10.9
    Vehicle Bolt Pattern :8x6.5" or 8x165.1mm
    Wheel Bolt Pattern :8x6.5" or 8x165.1mm
    Material :High Grade 6061-T6 Billet Aluminum
    Surface Finish :CNC Machined Polished Aluminum Finish
    Color :Silver
    Placement on Vehicle :Left
    Vehicle Fitment :For Dodge Ford Ram
    Center Bore Size :126mm
    Hub Centric :No
    Quantity :2pcs
    Manufacturer Warranty :1 Year
    Type :Wheel Spacers


    PayPal preferred.
    ☆ We will only ship to the confirmed PayPal shipping address given with the payment.
    ☆ Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
    ☆ All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    ☆ We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
    ☆ The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    ☆ We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    ☆ We stand behind every product we sell.
    ☆ All of our brand new items come with a 30-Days money-back guarantee.
    ☆ We define the item as defective only if it doesn't function as described.
    ☆ It is the buyer's responsibility to understand the item description before bidding.
    ☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
    ☆ Man-made damage by  abuse or wrong operation is not covered by this warranty.
    ☆ No  product liability insurance is assumed.
    ☆ Return shipping is to be paid by the Buyer.
    ☆ We are always been trying to provide best service and reliable products for every customer.
    ☆ If you are satisfed with the product you recieved, please have a good share.
    ☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to  reslove any problem for you.

    SINWONPARTS All rights reserved.