eBay

Efficient Power Conversion DCDC CC CV Converter 10 5V60V to 045V 12A 400W

DESCRIPTION

Features:
*Made of high quality materials, durable
*There is a constant current indication to the battery. The charging state is at a glance.
*Large output power, good ventilation natural heat dissipation can be 280W / 12A (note that there is output power and output current limit).
*10-60V wide input voltage, suitable for most power supplies on the market
*The module adopts the step stream plan, the efficiency is extremely high, the output voltage is 10V above 92% -96% or more
*There is input undervoltage protection

Specification:
Module Name: 400W antihypertensive constant voltage constant current
Module Properties: Non-Isolation Module
Input Voltage: 10.5-60V
Output voltage range: 0-45V (must meet the step-down conditions, IN input is 0.8)
Output lowest voltage: 0V (+ 1V)
Output highest voltage: about input * 0.8 (such as input is 40V, 40V * 0.8 = 32V max output voltage is 32V, the actual will reach 34V.35)
Output constant current: 0.2-15A (continuous adjustable, more than 12A to strengthen heat dissipation)
Output maximum power: 400W (need to add fan to heat sink and magnetic ring forced heat)
Continuous maximum work power: 280W (in a ventilation environment)
Continuous maximum operating current: 12A (in a ventilation environment)
Enter an undervoltage protection: Yes, (input below 10.5V off output, there is 0.5V left and right error)
Input overvoltage protection: no (forbidden overpressure)
Work temperature: -10 ~ + 85 degrees (reinforced heat after more than 65 degrees)
Working frequency: 100KHz
Conversion efficiency: up to 97% (efficiency and input, output voltage, current, pressure difference)
Short circuit protection: Yes (constant current protection)
Enter the reverse protection: Yes (short-circuited need to be cautiously input the fuse to burn into the fuse,)
Output anti-return: no (charge the battery, output the sensing load, such as the motor must be added to anti-irrigation diode)
Work indicator: Yes (blue LED light)
Constant current indicator: Yes (the CC on the small board "on the constant current work is on the red light, no current output, the constant pressure is not bright)
Wiring method: self-contained welding 25A terminal block
Module size: length 60mm width 60mm
Wiring: "Input / IN" is input. "Output / OUT" is output (there is a Chinese sign)

Package Contents:
1 x Module

Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

POLICES

ShippingPaymentWARRANTY

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.