Categories
Touch Sensor Switch Hand Sweep Switch Motion Sensor Smart LED Lamp Control New
Description
Features
1. Multi-function touch chip, the main light and blue indicator can be controlled separately smooth and detailed surface treatment, strong metal texture.
2. High-quality infrared pair of tubes, anti-strong light interference, induction range hand sweep on the light, and then sweep off the light.
3. People come to light, people leave the induction range after 30 seconds automatically turn off the light, can achieve no operation intelligent induction.
4. Good electrical conductivity, low heat generation, stable signal transmission, small chalking rate of copper wire.
5. Anti-black panel interference, responsive, long life, stable and reliable.
2. High-quality infrared pair of tubes, anti-strong light interference, induction range hand sweep on the light, and then sweep off the light.
3. People come to light, people leave the induction range after 30 seconds automatically turn off the light, can achieve no operation intelligent induction.
4. Good electrical conductivity, low heat generation, stable signal transmission, small chalking rate of copper wire.
5. Anti-black panel interference, responsive, long life, stable and reliable.
Specification
Touch Sensor (sub-control)
Model: YK-CM001
Input voltage: DC 3.7-24V
Controllable load: ≤5A
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The program identification judgment time of single and double click is 0.3 seconds
Control mode: click, control the main light (long press induction dimming), double click, control the blue light
Touch Sensor (sub-control)
Model: YK-CM001
Input voltage: DC 3.7-24V
Controllable load: ≤5A
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The program identification judgment time of single and double click is 0.3 seconds
Control mode: click, control the main light (long press induction dimming), double click, control the blue light
Touch Sensor (Centralized Control)
Model: YK-CMCX002
Input voltage: DC 12-24V
Maximum load: depends on the power supply power used in the supporting
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The judgment time for program identification of click and double click is 0.3 seconds, and the bottom of the switch is an unpluggable terminal, which is easy to arrange and
replacement
Model: YK-CMCX002
Input voltage: DC 12-24V
Maximum load: depends on the power supply power used in the supporting
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The judgment time for program identification of click and double click is 0.3 seconds, and the bottom of the switch is an unpluggable terminal, which is easy to arrange and
replacement
Body Sensor (sub-control)
Model: YK-RTCX001
Input voltage: DC 12-24V
Installation mode: open/embedded (12mm opening)
Controllable load: ≤5A
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Maximum load: 12V60W/24V100W
Note: People come to light up, people leave the induction range after 30 seconds automatically turn off the lights, can realize no operation intelligent induction.
Model: YK-RTCX001
Input voltage: DC 12-24V
Installation mode: open/embedded (12mm opening)
Controllable load: ≤5A
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Maximum load: 12V60W/24V100W
Note: People come to light up, people leave the induction range after 30 seconds automatically turn off the lights, can realize no operation intelligent induction.
Body Sensor (Centralized Control)
Model: YK-RTCX002
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (opening 12mm)
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Features: sensor head can be removed
Induction delay: people come to light, 30 seconds after the person left the light off
Light mode: that light is off
Note: Please use the special Hengle power supply with 3p set control port
Model: YK-RTCX002
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (opening 12mm)
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Features: sensor head can be removed
Induction delay: people come to light, 30 seconds after the person left the light off
Light mode: that light is off
Note: Please use the special Hengle power supply with 3p set control port
Sweep Sensor (sub-control)
Model: YK-SSCX001
Controllable load: ≤5A
Port: DuPont male
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction mode: hand sweep light on
Installation mode: open installation + concealed installation
Features: the sensor head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Port: DuPont male
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction mode: hand sweep light on
Installation mode: open installation + concealed installation
Features: the sensor head can be removed
Sweep Sensor (Centralized Control)
Model: YK-SSCX002
Installation mode: open/embedded (10mm opening)
Input voltage: DC 12-24V
Working load: Power supply power
Port: HY/3P male
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction type: that is bright that is extinguished
Opening depth: 25mm
Induction mode: hand sweep light on, then sweep light off
Installation mode: open installation + concealed installation
Features: sensor head can be removed
Model: YK-SSCX002
Installation mode: open/embedded (10mm opening)
Input voltage: DC 12-24V
Working load: Power supply power
Port: HY/3P male
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction type: that is bright that is extinguished
Opening depth: 25mm
Induction mode: hand sweep light on, then sweep light off
Installation mode: open installation + concealed installation
Features: sensor head can be removed
Single Door Sensor (sub-control)
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Port: DuPont male
Working load: 12V/60W 24V/100W
Induction mode: Open the door light on, close the door light off
Induction type: light on and off
Opening size: φ10mm*L10 Opening depth: 25mm
Installation mode: open installation + concealed installation induction head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Port: DuPont male
Working load: 12V/60W 24V/100W
Induction mode: Open the door light on, close the door light off
Induction type: light on and off
Opening size: φ10mm*L10 Opening depth: 25mm
Installation mode: open installation + concealed installation induction head can be removed
Single Door Sensor (Centralized Control)
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (10mm opening)
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction mode: open the door light on, close the door light off
Special features: the sensor head can be removed
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (10mm opening)
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction mode: open the door light on, close the door light off
Special features: the sensor head can be removed
Double Door Sensor (sub-control)
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction type: instant light is off
Induction mode: open the door light on, close the door light off
Special features: induction head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction type: instant light is off
Induction mode: open the door light on, close the door light off
Special features: induction head can be removed
Double Door Sensor (Centralized Control)
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Installation mode: open/embedded (opening 10mm)
Input voltage: DC 12-24V
Sensing distance: 5-8CM
Induction type: that light is extinguished
Induction mode: open the door light on, close the door light off
Opening size: φ10mm*L10
Special features: the induction head can be removed
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Installation mode: open/embedded (opening 10mm)
Input voltage: DC 12-24V
Sensing distance: 5-8CM
Induction type: that light is extinguished
Induction mode: open the door light on, close the door light off
Opening size: φ10mm*L10
Special features: the induction head can be removed
List
1 x Sensor Switch
1 x Sensor Switch
Touch Sensor Switch Hand Sweep Switch Motion Sensor Smart LED Lamp Control New
Description
Features
1. Multi-function touch chip, the main light and blue indicator can be controlled separately smooth and detailed surface treatment, strong metal texture.
2. High-quality infrared pair of tubes, anti-strong light interference, induction range hand sweep on the light, and then sweep off the light.
3. People come to light, people leave the induction range after 30 seconds automatically turn off the light, can achieve no operation intelligent induction.
4. Good electrical conductivity, low heat generation, stable signal transmission, small chalking rate of copper wire.
5. Anti-black panel interference, responsive, long life, stable and reliable.
2. High-quality infrared pair of tubes, anti-strong light interference, induction range hand sweep on the light, and then sweep off the light.
3. People come to light, people leave the induction range after 30 seconds automatically turn off the light, can achieve no operation intelligent induction.
4. Good electrical conductivity, low heat generation, stable signal transmission, small chalking rate of copper wire.
5. Anti-black panel interference, responsive, long life, stable and reliable.
Specification
Touch Sensor (sub-control)
Model: YK-CM001
Input voltage: DC 3.7-24V
Controllable load: ≤5A
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The program identification judgment time of single and double click is 0.3 seconds
Control mode: click, control the main light (long press induction dimming), double click, control the blue light
Touch Sensor (sub-control)
Model: YK-CM001
Input voltage: DC 3.7-24V
Controllable load: ≤5A
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The program identification judgment time of single and double click is 0.3 seconds
Control mode: click, control the main light (long press induction dimming), double click, control the blue light
Touch Sensor (Centralized Control)
Model: YK-CMCX002
Input voltage: DC 12-24V
Maximum load: depends on the power supply power used in the supporting
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The judgment time for program identification of click and double click is 0.3 seconds, and the bottom of the switch is an unpluggable terminal, which is easy to arrange and
replacement
Model: YK-CMCX002
Input voltage: DC 12-24V
Maximum load: depends on the power supply power used in the supporting
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The judgment time for program identification of click and double click is 0.3 seconds, and the bottom of the switch is an unpluggable terminal, which is easy to arrange and
replacement
Body Sensor (sub-control)
Model: YK-RTCX001
Input voltage: DC 12-24V
Installation mode: open/embedded (12mm opening)
Controllable load: ≤5A
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Maximum load: 12V60W/24V100W
Note: People come to light up, people leave the induction range after 30 seconds automatically turn off the lights, can realize no operation intelligent induction.
Model: YK-RTCX001
Input voltage: DC 12-24V
Installation mode: open/embedded (12mm opening)
Controllable load: ≤5A
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Maximum load: 12V60W/24V100W
Note: People come to light up, people leave the induction range after 30 seconds automatically turn off the lights, can realize no operation intelligent induction.
Body Sensor (Centralized Control)
Model: YK-RTCX002
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (opening 12mm)
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Features: sensor head can be removed
Induction delay: people come to light, 30 seconds after the person left the light off
Light mode: that light is off
Note: Please use the special Hengle power supply with 3p set control port
Model: YK-RTCX002
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (opening 12mm)
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Features: sensor head can be removed
Induction delay: people come to light, 30 seconds after the person left the light off
Light mode: that light is off
Note: Please use the special Hengle power supply with 3p set control port
Sweep Sensor (sub-control)
Model: YK-SSCX001
Controllable load: ≤5A
Port: DuPont male
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction mode: hand sweep light on
Installation mode: open installation + concealed installation
Features: the sensor head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Port: DuPont male
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction mode: hand sweep light on
Installation mode: open installation + concealed installation
Features: the sensor head can be removed
Sweep Sensor (Centralized Control)
Model: YK-SSCX002
Installation mode: open/embedded (10mm opening)
Input voltage: DC 12-24V
Working load: Power supply power
Port: HY/3P male
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction type: that is bright that is extinguished
Opening depth: 25mm
Induction mode: hand sweep light on, then sweep light off
Installation mode: open installation + concealed installation
Features: sensor head can be removed
Model: YK-SSCX002
Installation mode: open/embedded (10mm opening)
Input voltage: DC 12-24V
Working load: Power supply power
Port: HY/3P male
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction type: that is bright that is extinguished
Opening depth: 25mm
Induction mode: hand sweep light on, then sweep light off
Installation mode: open installation + concealed installation
Features: sensor head can be removed
Single Door Sensor (sub-control)
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Port: DuPont male
Working load: 12V/60W 24V/100W
Induction mode: Open the door light on, close the door light off
Induction type: light on and off
Opening size: φ10mm*L10 Opening depth: 25mm
Installation mode: open installation + concealed installation induction head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Port: DuPont male
Working load: 12V/60W 24V/100W
Induction mode: Open the door light on, close the door light off
Induction type: light on and off
Opening size: φ10mm*L10 Opening depth: 25mm
Installation mode: open installation + concealed installation induction head can be removed
Single Door Sensor (Centralized Control)
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (10mm opening)
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction mode: open the door light on, close the door light off
Special features: the sensor head can be removed
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (10mm opening)
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction mode: open the door light on, close the door light off
Special features: the sensor head can be removed
Double Door Sensor (sub-control)
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction type: instant light is off
Induction mode: open the door light on, close the door light off
Special features: induction head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction type: instant light is off
Induction mode: open the door light on, close the door light off
Special features: induction head can be removed
Double Door Sensor (Centralized Control)
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Installation mode: open/embedded (opening 10mm)
Input voltage: DC 12-24V
Sensing distance: 5-8CM
Induction type: that light is extinguished
Induction mode: open the door light on, close the door light off
Opening size: φ10mm*L10
Special features: the induction head can be removed
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Installation mode: open/embedded (opening 10mm)
Input voltage: DC 12-24V
Sensing distance: 5-8CM
Induction type: that light is extinguished
Induction mode: open the door light on, close the door light off
Opening size: φ10mm*L10
Special features: the induction head can be removed
List
1 x Sensor Switch
1 x Sensor Switch
