Description
4-Channel 2.4GHz Transmitter Receiver Kit Wireless Remote Control For Toy Car Model Ship DIY
Applications:
- Suitable for toy models with motors on the left and right sides and differential toys for differential turning (without servo).
- Can be used for differential boats, cars, tanks, etc. Very suitable for differential series DIY.
- Suitable for differential engineering vehicles, excavator, tanks, remote control ships, and bait boats. It is suitable for making differential turning toys driven by motors on left and right sides, such as tanks, excavator, and crawler robots with tracks on left and right sides. It is also suitable for remote control ships with two propellers on the left and right.
Attention: It is not very suitable for ordinary toy cars. Because the direction motor and drive motor of ordinary toy cars can move independently and do not rely on differential turns.
Specifications:
- Transmitter board: 2.2V -4.5V
- Receiving board: 3.6V-9V
- Distance: 100m and antennas do not need to be extended
- Frequency: high frequency 2.4G. Need to pair frequency for stable signals
- Power: high power. Integrated motor driver chip on the receiving board with MOS tubes features high driving efficiency and power saving. It is not a triode driver. The maximum current of 2A does not burn the board.It is generally suitable for small and medium motors within #380.
Pair Frequency (Pair Code):
Connect, press and hold buttons
on the remote control at the same time, and power on. At this time, indicator light on the transmitting board flashes quickly and enters paring frequency mode (if the receiver board is not power on in 15 seconds, it will automatically exit). Power on the receiving board again, and then you will see the indicators of the receiving board and the remote control flash 3 times slowly, which indicates that pairing is finished. (When multiple sets of transceiver modules are coded at the same time, remember that only one set can be coded at a time, and the other modules must be powered off.)
Attention: After successful paring frequency, there is no need to pair frequency next time. If the transmitting board or receiving board is lost, the new ones can be paired and used again. One remote control can be paired with multiple receivers to control.
Functions of Buttons (When one button is pressed, two motors will automatically cooperate to achieve a differential turn):
Button on the upper left corner of transmitter board: Press to realize two motor CW
Button on the bottom left corner of transmitter board: Press to realize two motor CCW
Left button on the right side of transmitter board: Press to make one motor CW and the other CCW (Tank and ship are turning at different speeds, without servo)
Right button on the right side of transmitter board: Press to make one motor CW and the other CCW (Tank and ship are turning at different speeds, without servo)
You can also turn left and right while moving forward or backward.
Attention: Reverse connection of motors is allowed. Press the forward and backward buttons of on the transmitter. When moving forward, if one motor is running in CW and the other is running in CCW, just reverse the two wires on the motor running CCW to adjust it. In short, if you reverse the two wires of a motor, its direction of rotation will be reversed! After the adjustment is correct, weld motor wire firmly.
Package Included:
- 1 x Set of 2.4G Remote Control Transceiver Board
Note:
- Power supply compartment, power wires and motor wires are included.
- Batteries and other items in the pictures are not included.
- The remote control and receiver set have been debugged by the manufacturer before delivery.
Applications:
- Suitable for toy models with motors on the left and right sides and differential toys for differential turning (without servo).
- Can be used for differential boats, cars, tanks, etc. Very suitable for differential series DIY.
- Suitable for differential engineering vehicles, excavator, tanks, remote control ships, and bait boats. It is suitable for making differential turning toys driven by motors on left and right sides, such as tanks, excavator, and crawler robots with tracks on left and right sides. It is also suitable for remote control ships with two propellers on the left and right.
Attention: It is not very suitable for ordinary toy cars. Because the direction motor and drive motor of ordinary toy cars can move independently and do not rely on differential turns.
Specifications:
- Transmitter board: 2.2V -4.5V
- Receiving board: 3.6V-9V
- Distance: 100m and antennas do not need to be extended
- Frequency: high frequency 2.4G. Need to pair frequency for stable signals
- Power: high power. Integrated motor driver chip on the receiving board with MOS tubes features high driving efficiency and power saving. It is not a triode driver. The maximum current of 2A does not burn the board.It is generally suitable for small and medium motors within #380.
Pair Frequency (Pair Code):
Connect, press and hold buttons
on the remote control at the same time, and power on. At this time, indicator light on the transmitting board flashes quickly and enters paring frequency mode (if the receiver board is not power on in 15 seconds, it will automatically exit). Power on the receiving board again, and then you will see the indicators of the receiving board and the remote control flash 3 times slowly, which indicates that pairing is finished. (When multiple sets of transceiver modules are coded at the same time, remember that only one set can be coded at a time, and the other modules must be powered off.)Attention: After successful paring frequency, there is no need to pair frequency next time. If the transmitting board or receiving board is lost, the new ones can be paired and used again. One remote control can be paired with multiple receivers to control.
Functions of Buttons (When one button is pressed, two motors will automatically cooperate to achieve a differential turn):
Button on the upper left corner of transmitter board: Press to realize two motor CW Button on the bottom left corner of transmitter board: Press to realize two motor CCW Left button on the right side of transmitter board: Press to make one motor CW and the other CCW (Tank and ship are turning at different speeds, without servo)Right button on the right side of transmitter board: Press to make one motor CW and the other CCW (Tank and ship are turning at different speeds, without servo)You can also turn left and right while moving forward or backward.
Attention: Reverse connection of motors is allowed. Press the forward and backward buttons of on the transmitter. When moving forward, if one motor is running in CW and the other is running in CCW, just reverse the two wires on the motor running CCW to adjust it. In short, if you reverse the two wires of a motor, its direction of rotation will be reversed! After the adjustment is correct, weld motor wire firmly.
Package Included:
- 1 x Set of 2.4G Remote Control Transceiver Board
Note:
- Power supply compartment, power wires and motor wires are included.
- Batteries and other items in the pictures are not included.
- The remote control and receiver set have been debugged by the manufacturer before delivery.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
