Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Mercedes-Benz R-Class W251
R320 Bluetec Wagon 4-Door 3.0L 2009
R320 CDI Wagon 4-Door 3.0L 2007-2008
R350 4Matic Wagon 4-Door 3.5L 2006-2013
R350 Base Wagon 4-Door 3.5L 2008-2013
R350 Bluetec 4Matic Wagon 4-Door 3.0L 2010-2013
R500 Base Wagon 4-Door 5.0L 2006-2008
R500 Premium Wagon 4-Door 5.0L 2006
R500 Sport Wagon 4-Door 5.0L 2006-2008
R550 4Matic Wagon 4-Door 5.5L 2008
R63 AMG Base Wagon 4-Door 6.3L 2007
Air Suspension Structure:
OEM Part Number:
2513201204
2513201304
2513202004
2513202104
2513202704
2513202604
Features and Benefits:
- Made of high quality raw materials, effectively reduce air leakage, strong sealing
- All parts are hand inspected off the line before packaging and once again by our team before shipment.
- According to the original factory specifications.
- Perfect match for the original car.
- Extensive performance testing, including inflation time, electrical current and solenoid operation is done on every unit to ensure consistent, reliable performance
- Stable characteristics, high reliability.
- Aftermarket Products with Premium Quality.
- Air dryers are included for hassle-free installation
- Return policy: Enjoy 30 days return and exchange
Installation Information:
Air Compressor failure is typically the result of a leak or other issue in the air suspension system. To ensure that your new compressor will work without issue, you should do the following, prior to installation:
- Check for blown fuses and ensure the relay is working properly. A failed Air Suspension Compressor Relay is a top cause of air compressor failure. They normally fail in the “closed” position and should be replaced during compressor installation
- Check and replace the Air Springs if they are showing signs of cracks, deterioration, moisture, or are leaking. Complete Air Strut assemblies, which include the Mount and Air Spring, can be found in the Strut category
- Verify that the air line and wiring harnesses are connected without signs of physical damage
- Ensure that the fittings and valve connections are fully seated and undamaged. Make sure that the air line is secured at the proper depth
- Check the electrical connections and the orientation of the Ride Height Sensor arms
- Check all Air Suspension Solenoid connections and fittings; inspect for any cracks or other damage
- Inspect the air lines for kinks, holes or other damage
AIR SUSPENSION COMPRESSOR REMOVAL:
1. SET STEERING TO STRAIGHT AHEAD.
2. LIFT VEHICLE.
3. REMOVE FRONT RIGHT WHEEL.
4. REMOVE THE FASTENERS AND FRONT INNER WHEEL WELL LINER FROM THE VEHICLE TO EXPOSE
THE VEHICLES AIR SUSPENSION COMPRESSOR. (FIGURES 1, 2)
5.LOCATE AND SLOWLY REMOVE THE AIR LINE FROM THE COMPRESSOR. (FIGURES 3, 4)
6.LOCATE AND DISCONNECT THE TWO (2) ELECTRICAL CONNECTORS FROM THE COMPRESSOR. (FIGURES 5, 6)
7.LOCATE THE EXHAUST HOSE LEADING TO THE COMPRESSOR. PINCH AND SLIDE THE HOSE
CLAMP OFF OF THE AIR FITTING AND REMOVE THE AIR HOSE. (FIGURE 7)
8.LOCATE AND REMOVE THE THREE (3) MOUNTING NUTS TO REMOVE THE COMPRESSOR FROM
THE VEHICLE. NOTE: ALL FACTORY HARDWARE WILL BE REUSED IN THE INSTALLATION PROCESS.
(FIGURES 8, 9, 10, 11)
9.REMOVE THE COMPRESSOR FROM THE VEHICLE. (FIGURE 12)
10.REMOVAL COMPLETE.
AIR SUSPENSION COMPRESSOR INSTALLATION:
1. REUSING THE MOUNTING HARDWARE, INSTALL THE NEW COMPRESSOR INTO THE VEHICLE.
(FIGURES 13, 14, 15)
2.REINSTALL THE THREE (3) MOUNTING NUTS TO ATTACH THE COMPRESSOR TO THE VEHICLE.
NOTE: FACTORY HARDWARE AND ISOLATORS WILL BE REUSED IN THE INSTALLATION PROCESS. (FIGURE 16)
3.REINSTALL THE EXHAUST HOSE TO THE NEW COMPRESSOR. (FIGURES 17, 18)
4.CONNECT THE TWO (2) ELECTRICAL CONNECTORS TO THE NEW COMPRESSOR. (FIGURES 19, 20)
5. PREPARE THE EXISTING AIR LINE BY REMOVING THE OLD AIR FITTING, USING THE FIGURE BELOW
AS AN EXAMPLE. (FIGURE 21)
6.REMOVE THE SHIPPING PIN FROM THE COMPRESSOR AND INSERT THE AIR LINE. PRESS THE LINE IN
UNTIL IT IS FIRMLY SEATED. (FIGURES 22, 23)
7.RE-INSTALL THE FASTENERS AND FRONT INNER WHEEL WELL LINER ON THE VEHICLE. (FIGURE 1)
8. RE-INSTALL FRONT RIGHT WHEEL.
9. LOWER VEHICLE.
10. INSTALLATION COMPLETE.
The Detail of Accessory (Important):
Purchase List:
Air Suspension Compressor
Item Specifications:
1. Key Words:Air Ride Suspension Compressor Pump Fits Mercedes R-Class W251 R320 R350 R500 R550 R63 AMG 2006-2013
2. Package Includes: Air Suspension Compressor
Notes: Please double confirm the compatibility as well as the OEM number before purchasing.
Instruction is not included. Professional installation is recommended.