Description CV Joint Boot fits NISSAN CHERRY N12 1.0 Front Outer 82 to 86 E10 C.V. Febi
Brand | Febi | Placement on Vehicle | Front Axle, Wheel Side | Length | 84 mm | Additional Information | with grease | Material | Rubber | Additional Information 2 | with clamps | Inner diameter 1 | 20 mm | Inner diameter 2 | 68 mm | Weight | 0.15 kg | Note | Observe service information | Type | Bellow Kit, drive shaft |
Documents / Graphics
Information General Information These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. This kit includes the following parts: - 1x Febi Bellow, drive shaft (17081)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
Cross references A.Z. Meisterteile | AZMT-43-020-1323, AZMT-43-020-1351 | AKRON-MALÒ | 271021, 50476, 50476KLR, 52004, 52004KLR | ALP | ALP-000755 | ASHIKA | 63-00-007, 63-06-600 | Aslyx | AS-200755 | ASVA | ASBT-23 | AUTEX | 502605, 503712 | AUTOFREN SEINSA | D8121, D8245 | AUTOTEAM | G500272, G500563, G500737 | BIRTH | 7645 | BLUE PRINT | ADN18107 | CAUTEX | 700846, 701087 | CEVAM | 1052, 1353, 1471 | CIFAM | 613-084, 613-137, 613-142, 613-150, 613-215 | DA SILVA | K2021, K2053 | DEPA | 5085 | EKG | 926219 | ERT | 500041, 500206 | FARE SA | 0802, K802 | FARE-CO | 0802, K802 | FARE-MX | 0802, K802 | FARE-RCH | 0802, K802 | GOOM | CB-0043, CB-0220 | GSP | 780100, 780201 | HEPU | 35-1600, 35-2707 | HERTH+BUSS JAKOPARTS | J2860307, J2866000, J2867009 | IAP QUALITY PARTS | 407-13091 | IPD | 35-1600, 35-2707 | JAPANPARTS | KB-007, KB-600 | JAPKO | 63007, 63600 | JIKIU | CD00001, CD22039 | JPN | 50P6001-JPN, 50P8001-JPN | KAVO PARTS | CVB-8508 | LEMFÖRDER | 15349 01 | LÖBRO | 300346, 300348, 304027 | MAPCO | 18526 | MAXGEAR | 49-0712, 49-0726 | MDR | GSP-780100, GSP-780201, MOB-8007, MOB-8600 | Metalcaucho | 02378 | METELLI | 13-0084, 13-0137, 13-0142, 13-0150, 13-0215 | MI.R.A. | 60/2356, 60/2356K | MTR | TR10072, TR10073 | NIPPARTS | J2860307, J2866002, J2868000 | NK | 522201, 525101, 525105 | NPS | D282O02, D282U18, H282A54 | OPEN PARTS | SJK7032.00 | OPTIMAL | CVB-10233CR, CVB-10385CR | ORIGINAL IMPERIUM | 39046, 39060, 70021, 70667 | Oyodo | 50P0307-OYO | PASCAL | G50300PC, G56000PC, G60001PC | PEMEBLA | JAPKB-007, JAPKB-600 | PLYOM | P700846 | PROFIT | 2710-1280 XLB | PROTECHNIC | PRB040, PRB050, PRB052, PRB160 | QH Talbros | QJB241 | RECOFICIAL | D8121 | RED-LINE | 59CV014, 59DW001 | RIDEX | 193B0090 | RUVILLE | 757904, 759002 | SASIC | 9004673 | Schaeffler FAG | 772 0062 30, 772 0094 30 | Seiken | 600-00067 | SERCORE | 06K199, 06K368 | SPIDAN | 22149, 23069, 26219 | Stark | SKBDA-1300091 | STC | T402378 | STELLOX | 13-00111-SX, 13-00188-SX, 13-03037-SX | SWAG | 82 91 7082 | TrakMotive | 50-0272, 50-0563, 50-0737 | TRISCAN | 8540 14810, 8540 21803, 8540 41802 | UNIGOM | 310204, 310204.2, 313072, 313072.2 | VEMA | VE7645 |
Compatible with the following OEM references DAIHATSU | 0443887220, 0443887701, 0443887704, 0443887706, 0443887F05 | KIA | B00122530A, KK15022530, KK15022630 | NISSAN | 3724101M25, 3724101M29, 3924101M29, 3924101M29SK |
Passenger/LCV Vehicles Vehicle | Body | Fuel | From | To | Drive | Valves | BHP | KW |
---|
NISSAN CHERRY III (N12) 1.0 | Hatchback | Petrol | 05/1982 | 05/1986 | FWD | 8 | 50 | 37 | NISSAN MICRA I (K10) 1.0 | Hatchback | Petrol | 12/1982 | 05/1989 | FWD | 8 | 54 | 40 | NISSAN MICRA I (K10) 1.0 | Hatchback | Petrol | 12/1982 | 12/1989 | FWD | 8 | 50 | 37 | NISSAN MICRA I (K10) 1.2 | Hatchback | Petrol | 07/1986 | 07/1992 | FWD | 8 | 60 | 44 | NISSAN MICRA I (K10) 1.2 | Hatchback | Petrol | 07/1986 | 07/1992 | FWD | 8 | 54 | 40 |
As one of the global leaders in passenger car and commercial vehicle spare parts for more than 160 years, Febi Bilstein is constantly setting new standards in the independent aftermarket: More than 20,000 OE quality spare parts, the highest standards of service and cutting edge logistics.
Returns We provide a simple no-nonsense returns policy:
1. Always contact us first. We cannot process a return if you do not email us. 2. We can only accept returns if they are either genuinely faulty or in pristine condition (have not been fitted and in original unmarked packaging). 3. Returns received by us 30 days or more after the date of despatch will not be accepted unless specifically agreed beforehand. 4. We will process your return within 2 working days and will act quickly to action whatever we have agreed over email (refund, replacement or exchange).
|