Mini Chamfering Machine Manual Linear Chamfering Tool

-The 1/4'' Pneumatic Chamfering Machine has a mini body, is light and convenient, can be chamfered in the narrowest and shallowest space and operated with one hand, fast cutting right and round corners.

-Using a sharp tungsten steel double cutter head, the cutting force is strong, sturdy, and durable .Equipped with metal safety switch and safety buckle. Alloy guide plate can effectively block chamfer waste.

-Used for deburring and chamfering the R side of metal trimming arc corners. Suitable for various angles, such as straight edge straight chamfering, inner and outer round hole chamfering, Irregular chamfering, multilateral chamfering of the keyway.

How to Replace blade? Use a hexagon wrench to loosen the plum screw,remove the baffle plate, remove the blade screw with a ring wrench,remove the old blade,and replace it with a new one.

The chamfer size can be adjusted at will: Loosen the 2 screws of the black gear plate with a thinner Allen key, twist the black gear plate left and right, adjust the chamfer size, and fix the 2 screws back to the original position.

Maintenance Tips

1. Before using the new machine, please inject pneumatic tool oil and inject about 4C.C into the air inlet. After continuous use for about 3 hours, about 4C.C is also injected into the air inlet.

2. After injecting pneumatic tool oil, let the machine idling for about ten seconds (do not operate), and let the internal parts of the grinder be lubricated as a whole before proceeding.

3. It is an air compressor (air pump) for mechanical use. The output of the air compressor is about 6~8kg. Generally, most of the compressed gas of a traditional air compressor contains water, and the piston of the air compressor brings out a small part of the lubricating oil. If the oil-water separator is not used, water and oil and gas will enter the inside of the machine for a long time. The occurrence of adhesion slows down the rotation of the machine, resulting in insufficient speed and torque. In this way, the pneumatic tool oil needs to be input into the air inlet, and the machine can be used normally after idling for about ten seconds.

Chamfering Machine can Pour Shapes

1. The maximum processing C Angle of this chamfering machine is C0.1-2 (The best effect is C1, C1 to C2 is best to be chamfered in two times, so the effect is better.)
2. Angle R is the arc Angle of R1.5
3. Adjusting the scale wheel can adjust the size of the bevel of the cut, but not the angle.

• The chamfer size can be adjusted at will: Loosen the 2 screws of the black gear plate with a thinner Allen key, twist the black gear plate left and right, adjust the chamfer size, and fix the 2 screws back to the original position

Change blade operation: Loosen the triangle blade screw with a thicker Torx wrench, replace the blade with a new one, and fix the screw again.

5 Speed Design Five gears can be freely adjusted to the appropriate intake speed for use	Chamfer Size Adjustment Open the screw, rotate to select the scale size, 0.1-1.5MM adjustable, the maximum measured can be inverted to C1.5MM	Adjustable Exhaust prot Exhaust port can be adjusted by 360 degree rotation，exhaust in any direction	Sharp tungsten steel double cutter head Triangle tungsten steel cutter head, auxiliary bearing, strong and durable

Features: 

【HIGH QUALITY】Dual blade design, depth adjustable. Using sharp tungsten steel double cutter head, strong cutting force, sturdiness and durability.

【RELIABLE DESIGN】1/4'' air inlet with filter to prevent foreign matter from entering.

【HIGHER CUTTING EFFICIENCY】Using the thinnest outer 1mm hexagon nut lock bearing, it can be chamfered in the narrowest and shallowest space, suitable for various angles, such as straight edge chamfering, inner and outer round hole chamfering, irregular chamfering, keyway Polygon chamfer.

【SAFETY & STABILITY】The chamfering machine maintains accurate assembly and is equipped with a 360-degree rotating exhaust port, which can quickly exhaust, reduce the machine temperature, stable performance, and long service life.

【EASY TO OPERATE】Mini body design, light and convenient, one-handed operation, fast cutting right and round corners, effectively improving work efficiency.

Specification: 

Type: Chamfering Machine

Material: Metal

Chamfer Angle: 45° Bevel

Chamfering Ability: 0-1.5mm

Adjustable Depth: 0.1-0.9mm

Working Pressure: 0.4-0.6MPA

Max Speed: 30000RPM

Air consumption: 0.4 m³/min

Chamfer Aperture: >8mm

Chamfer Plate Thickness: >3mm

weight: 325g

Package: (Depending on your choice,as the picture show!)

Option 1:
1 Set of Chamfering Machine

Option 2:

Only 5PC C Angle Blade+5PC Bearing

or:
Only 5PC R Angle Blade+5PC Bearing